Model #A650A TEAC Tape Deck

  • No Image Available - Fidelitone
    3 Results
Find part by diagram >

Question and Answers

Q:

My Samsung LCD TV Model Number LN40A650A1F, S/N: AL0R3CLQ607154J has sound but no picture.

A:

Thank you for contacting Searspartsdirect.com with your question about your television. I am sorry you are having issues with you TV. I know the TV is a key part of our daily lives and know you want to get it working as soon as possible. We are unable to give any information on televisions. In this case I would recommend having a qualified technician test and repair your television. Internal components of the TV can retain dangerous high electrical charges even when the TV is disconnected. So as a safety precaution we do not give advice on repairing TVs. If you wish to have service set up you can do so at www.searshomeservices.com.

Thank you for your understanding of the situation. Again thank you for choosing Sears we appreciate your business. 

Read More
Benny23 -
Sears Technician
August 07, 2015
Q:

What kind of screws do I need for the TV base I just purchased from Sears PartsDirect LN52A650A1FXZA Samsung Lcd television

A:

Thanks for the inquiry and for being a valued member.

The stand screws are spec BH,+,M4,L16,ZPC from Samsung and are part number 6002-001294. They are being offered as an 8-pack on Sears Parts, but the stand should only require 4. 

For convenience, I have linked the screw pack below. Just click on the link to be directed to the Sears Parts site to view and purchase when needed.

Samsung Base Screw Pack

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
December 08, 2014
Q:

SAMSUNG LCD TV Model #LN52A650A1F NO PICTURE LN52A650A1FXZA Samsung Lcd television

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

 

Read More
Joseph P. -
June 15, 2013
A:

Working on a TV can be difficult and dangerous due to the high voltage circuits inside. Always remember to unplug any TV before trying to service it and if unsure of the proper procedures, seek the service of a trained professional. 

 

Hello Weifeng,

 

I'm sorry to hear that your television has malfunctioned and I would like to assist you. if it is mounted in the middle of the panel, up high in the back or the television, it is the T-Con board that is malfunctioning.  There are several different versions of you television and in order to attempt to get the correct part number the version needs to be determined.  It is on the label on the back of the television where the model number is located and will look something like SQ01 or 0002.  Reply with this code and I will be able to look up the correct part number for you.

 

I look forward to assisting you further.

 

Jerry C 

Read More
Jerry C -
Sears Technician
June 18, 2013
See more answers