Model #9903 WEBER Grill, Gas

  • Summit Built-in Side Burner
    3 Results
Find part by diagram >

Question and Answers

Q:

Help with kenmore stand alone ice maker model 106.89483996 9903 Makita 3" x 21" belt sander

A:

Thank you for choosing SearsPartsDirect.com. I will be more then happy to assist you. I know it can be disappointing when the icemaker stops working. Looking at the information I'm showing this could be cause by one of two things. Could be PcB assembly or Ice control Thermister. If its not one it could be both. The part numbers for these two parts are, PcB 2304016, or the Thermister W10683580.  Hope this information has help you. If you are not comfortable doing this repair you can Click Here to schedule a technician or call toll free 1-800-469-4663. Any further questions or concerns. You will have to post a new question because at this time I can not reply to any comments. Again, Thank you for choosing SearsPartsDirect.com.
 

Read More
Samantha A -
Sears Technician
June 11, 2014
Q:

Kenmore slide-in range glass cooktop replacement

A:

When making some major repairs on a range I know how important it is to have detailed instructions to make the project much easier. While you are waiting for your expert answer, I did manage to find a link that will provide you with some good information to help you with your project. I hope my link is useful.

Read More
Joseph P. -
May 25, 2011
A:

I provided a procedure for replacing that glass top on your slide-in range in the image below. Be sure that you shut off the house circuit breaker for the range before beginning this repair.

If you need more help, let us know.

Read More
Lyle W -
Sears Technician
May 26, 2011
A:

I cannot see the instructions that were supposedly included in the answers above. Please repost

Read More
laura -
April 28, 2013
A:

Hello Laura. I apologize for the problem with the image that was posted above. Here is another posting of that image. If you are viewing this answer on the Sears PartsDirect website, then you will need to copy this URL into your browser to visit the Manage My Life website and view the image: http://www.managemylife.com/mmh/questions/252083-kenmore-slide-range-glass-cooktop-replacement

Read More
Lyle W -
Sears Technician
April 29, 2013
See more answers
Q:

My kenmore elite stand alone ice maker gets cold and the water tray fills , but the pump does not run to get the water up to the freeze plate ,

A:

I did some research for you but was not able to find a solution. Your expert will be able to help answer your question. To better help you, I would like to suggest adding the full model number of the ice maker. This will help your expert. It may take two business day for your expert to reply. I do hope that everything works out.

Read More
Marc -
March 13, 2013
A:

Thanks , the model number is 46-9903

Read More
Tim -
March 13, 2013
A:

Thanks for the inquiry about your ice machine; sorry it is experiencing a problem. On most models the water flow to the freeze plate will start after the reservoir has filled and the freeze plate begins to chill. However I would need a complete model number off the product before I can be sure of your unit's cycle operation.  You may want to check the pump, if this unit has set unused for any time the pump could just be stuck. You can also check voltage to it, most are 120 volt pumps. _Always disconnect power supply before servicing the appliance and when testing live voltage be sure to wear proper safety equipment (gloves and eye protection) also be aware of sharp metals on product_I hope this helps if you need additional assistance please reply with the model number off the unit and additional details and I will be happy to respond. If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services.Ron H.

Read More
Ron H -
Sears Technician
March 14, 2013
See more answers