Model #9622 PEERLESS Faucet

  • Two Handle Washerless Lavatory Faucets
    3 Results
Find part by diagram >

Question and Answers

Q:

I think my heating element went out in my electric stove, I don't know how to fix it

A:

It is very important to know the complete model number for the Kenmore range in order to get the correct parts. Below is a link for locations on ranges and also the link to searspartsdirect.com for ordering parts. An expert will be with you with additional information. Hope the links are helpful.

Read More
Anna T -
June 01, 2012
A:

Thank you for your question and I understand your concern.

The specific model number of your range is located around the oven cavity opening or on the frame behind the storage drawer on the right side.

The failure could be the burner control switch, simmer select control board or the radiant burner. Before any parts should be replaced, the voltage supply should be measured across terminals H1 and H2 on the burner switch. If 220 volts is measures, the radiant burner is faulty. If 220 volts is not measured; it could have a faulty burner switch or simmer select control board. If 220 volts is not measured across H1 and H2, the voltage supply will need to be measured across H1 on the burner switch and L2 in on the electronic oven control board. If 220 volts is measured, the simmer select control board is faulty. NOTE: I do not recommend measuring voltage unless you have experience and feel safe and confident in doing so; otherwise I strongly suggest calling a service technician to diagnose and repair your range.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
June 04, 2012
A:

is there a video on how to replace this?

Read More
Ranae -
July 16, 2013
A:

Ranae; We do not have a video. The procedure is a reasonably easy. Disconnect the power cord from the power source. Remove the screws from the cover from behind the control panel. Remove one wire at a time from the old switch and transfer to wire to the matching terminal on the new switch. Pull the burner knob off the old switch and remove the two screws securing the switch to the control panel and remove the old switch. Insert the new switch and install the two screws and push the knob back on.

Read More
Joey S -
Sears Technician
July 16, 2013
A:

I watched a video on it before, but can't find it. Its the burner that needs replaced.

Read More
Ranae -
July 16, 2013
A:

Ranae; It order to determine if the burner or switch is faulty, a volt/ohm meter will be needed to test the voltage supply to the element that is not working which can be checked and measured from the back of the control panel. I suggest calling a service technician to diagnose which one is faulty if you do not have experience and do not feel safe and confident in measuring voltage. We do not have video but you can likely find one on the web.

Read More
Joey S -
Sears Technician
July 16, 2013
See more answers
Q:

How to replace glass top on Range?

A:

The experts will be more than happy to get you information on replacing the glass top on your Kenmore range.  Pease click on this link for the information you are requesting.  I hope this is helpful.

Read More
Anna T -
May 22, 2013
A:

I know that it can be very frustrating to have issues with your range. The images below will provide the information that you need to remove and replace the glass top. I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
May 22, 2013
See more answers
Q:

oven burner not working and burnt a hole in bottom of oven.

A:

Model is 790-9622

Read More
charlie -
January 03, 2012
A:

do you have an instant message sight?

Read More
charlie -
January 03, 2012
A:

Not having your oven in working condition can be a frustrating. I was looking thru the site and came upon some information that can help you in replacing the heating element. I have attached the link below, Hope it helps!

Read More
Maira -
January 03, 2012
A:

For better model specific information from the expert I do also recommend submitting your model number of the oven to the experts for better recommendations. You can add to the thread below.

Read More
Maira -
January 03, 2012
A:

It sounds like you are indicating that you have a hole in the bottom oven panel (Key 8 in the parts image shown below). If that is the case, then I recommend that you replace that bottom panel instead of trying to patch the hole. The part number for that bottom panel is 316400601. You can order that part from the Sears PartsDirect website. You can also order the heating element from that website.

Be sure that you unplug the range before accessing and replacing that bake element and bottom oven panel.

A break in that oven element probably caused the internal wires in that component to short against the metal bottom panel of the oven. It is difficult to determine the cause of that element failure. The element may have had a weak spot that eventually broke and exposed the internal wiring. The element will not likely fail again in that manner once you replace it.

If you need more help, reply with additional details and we will assist you further.

If you prefer to have a service technician examine and repair this failure, you can schedule one through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
January 05, 2012
A:

At this time, we do not have an instant message service. We will receive a notification if you reply to this thread so that we can continue to assist you.

Read More
Lyle W -
Sears Technician
January 05, 2012
See more answers