Model #9432 SINGER Mechanical Sewing Machines

  • Attachment Set
    3 Results
  • Attachment Set Page 2
    3 Results
  • Covers And Add Ons
    3 Results
  • Covers And Add Ons Page 2
    3 Results
  • Arm Top Cover
    3 Results
  • Arm Top Cover Page 2
    3 Results
  • Arm Top Cover Page 3
    3 Results
  • Arm Top Cover Page 4
    3 Results
  • Arm Shaft Drive System
    3 Results
  • Arm Shaft Drive System Page 2
    3 Results
  • Hand Wheel
    3 Results
  • Hand Wheel Page 2
    3 Results
  • Coaxial Presser Bar System For New Head End
    3 Results
  • Coaxial Presser Bar System For New Head End Page 2
    3 Results
  • Needle Bar And Thread Take-up For New Head End
    3 Results
  • Alpha Feed
    3 Results
  • Alpha Feed Page 2
    3 Results
  • Alpha Feed Page 3
    3 Results
  • Alpha Feed Page 4
    3 Results
  • Hook System
    3 Results
  • Hook System Page 2
    3 Results
  • Demand Responsive Needle Tension System
    3 Results
  • Demand Responsive Needle Tension System Page 2
    3 Results
  • Electrical Equipment
    3 Results
  • Electrical Equipment Page 2
    3 Results
  • Electrical Equipment Page 3
    3 Results
  • Electrical Equipment Page 4
    3 Results
Find part by diagram >

Question and Answers

Q:

Disable f1 fault beeping 7909432

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Kenmore range.

From the information you have provided above, I can understand the frustration of having your range malfunction, after researching model number 790.9432. the error code F1 you’re receiving indicates an issue with the main electronic control board or the a increase in temperature Check the oven temperature sensor probe and replace if necessary. If the oven is overheating, disconnect power. If oven continues to overheat when the power is reapplied, replace the oven's electronic control board. Severe overheating may require replacing the oven, if damage is extensive..

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

*Safety disclaimer before you try and repair the unit make sure the power supply is disconnected. There may be sharp parts to the unit that can cause injury to you if not careful. If you don’t not feel comfortable checking this yourself you can request a technician by visiting www.SearsHomeService.com*

Read More
Benny23 -
Sears Technician
June 20, 2015