Model #9404 MAKITA Sander

  • 4" X 24" Belt Sander
    3 Results
Find part by diagram >

Question and Answers

Q:

How do you replace the heating element in a Kenmore Electric Range, models 790.9403, 9404? Have the parts. Is it just unscrew the old and screw in the new?

A:

You seem to have the right idea when it comes to replacing the heating element on the Kenmore range. Please check out the link below on a similar question. Additional information pertaining to your model may take two business days.

Read More
anna -
June 19, 2013
A:

Thank you for submitting your question. I understand your concern and I will be happy to assist you. Correct. You'll just need to unscrew the old element off off o the interior back panel and then screw in your new one. Anna, has provided you grea information as well. I hope this helps. Please reply back to this thread if you require further assistance. Thank you for using Manage My Life.

Read More
Tykara -
Sears Technician
June 20, 2013
See more answers
Q:

why my oven don't work?

A:

I understand that your oven is not working. I have taken some time to research your question here on the Manage My Life website and I noticed that someone else had asked a similar question with a posted response from an expert. I attached the link below for you to view. I hope the link that I provided is helpful.

Read More
Alina F. -
March 13, 2011
A:

If the bake element was shorted, it probably damaged the relay on the clock when it failed. More than likely you need to replace the clock.

Before spending the money on a new clock, disconnect the power to the range and remove the rear panels. Check the wiring to the bake and broil elements to be sure it is not burned or broken.

Read More
Jimmy K -
Sears Technician
March 14, 2011
See more answers
Q:

"Element On" indicator light won't turn off

A:

Having a Range not work properly can be quite a concern. I have taken the time to research on the Manage My Life website and have some useful information. While you are waiting for an expert to reply I have attached a few links below if you would like to take the time to view. Hope the information provided is useful.

Read More
Priscilla V -
January 07, 2011
A:

Thank you. The links were very helpful.

Read More
Anonymous -
January 07, 2011
A:

I can understand your concern. The information you have already received is correct. This will be a stuck contact in one of the switches. If you would like more assistance, any additional details will be helpful and I will be glad to assist you further. Thank you for using Manage My Life.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
January 08, 2011
See more answers