Model #936060 ARIENS Lawn, Tractor

  • Electrical
    3 Results
  • Chassis
    3 Results
  • Drive
    3 Results
  • Engine
    3 Results
  • Steering
    3 Results
  • Mower Deck
    3 Results
  • Mower Lift
    3 Results
  • Seat
    3 Results
  • Decals
    3 Results
  • Wheels & Tires
    3 Results
  • Schematic Diagram
    3 Results
  • Peerless Transaxle
    3 Results
Find part by diagram >

Question and Answers

Q:

I have a Ariens mower Model 936060, I need the part # for an air filter and a fueel filter for this model it has a 17.5 Briggs and Straton ngine Ariens Tractor

A:

Thank you for choosing SearsPartsdDirect.com. Thank you for your question. Finding the engine parts can be difficult at times. Especially when the model number of the engine is not known. Goof thing your model number pulls up the engine model number! I see here that your air filter is part number 591334. You can click here for the filter. The oil fiter is going to be part number 492932S. You can click here for the oil filter. For any future engine parts, your engine model number is 31C707-3346-G1. I hope this helps you. Have a great day!

Read More
Samantha A -
Sears Technician
May 20, 2014
Q:

blade question

A:

Good morning Casey. By, "nothing happened", do you mean the tractor stalled or the blades would not engage? By your phrasing, I am assuming it is a blade issue but I want to be sure. I did not find any specific information regarding your specific model number but the theory is similar in all tractors. I did find a link that I have provided below that will explore different reasons for this happening. You will still be receiving a expert response from our team within a day or two. I hope this helps and have a nice day.

Read More
Henry -
September 08, 2012
A:

thanks henry. yes, when the control lever is moved in its slot upward the blades never engage. casey

Read More
Casey -
September 08, 2012
A:

Thank you for your question.

I will be happy to assist you. First park the tractor on a hard level surface and remove the key. Then lower the mower deck and check the belt routing. The owner�s manual should have a picture showing the belt routing. If the belt is fine, have a helper sit on the seat, and move the engagement lever while you watch below. As the lever lifted, you should see the cable tighten up. When it tightens, it should pull on the idler arm and tighten the belt. If it is not doing that, inspect the cable from the lever to the idler arm.
I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
September 09, 2012
A:

Thank you for your question.

I will be happy to assist you. First park the tractor on a hard level surface and remove the key. Then lower the mower deck and check the belt routing. The owner�s manual should have a picture showing the belt routing. If the belt is fine, have a helper sit on the seat, and move the engagement lever while you watch below. As the lever lifted, you should see the cable tighten up. When it tightens, it should pull on the idler arm and tighten the belt. If it is not doing that, inspect the cable from the lever to the idler arm.
I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
September 09, 2012
See more answers

Top Parts