Model #9230 PEERLESS Faucet

  • Two Handle Washerless Bar Sink And Laundry Faucets
    3 Results
Find part by diagram >

Question and Answers

Q:

My Kenmore oven is not working.

A:

I can understand your frustration over your oven malfunctioning. While you are waiting for your expert answer, I did some research on the unit. At this time, I was unable to locate information that would be helpful in regards to your question. Some of these questions that are asked will need specific research and will be answered by an expert with-in two business days but usually sooner.

Read More
Julio -
May 28, 2013
A:

Thanks for contacting manage my life about your range/oven model 790.9210…., sorry you are having a problem, I will be glad to assist you. Based on your description of the problem I can advise on some things to check. You will first need to determine if the elements are being powered up at all, if there is not heat most likely they are not getting power.  _Always disconnect power supply before servicing the appliance and when testing live voltage be sure to wear proper safety equipment (gloves and eye protection) also be aware of sharp metals on product_ With the oven set to bake you will need to check voltage to the bake element, this can be done at the control. If there is no power coming out of the control going to the element then the control is bad and needs replacing. If there is power going to the elements, then you will need to trace the wiring for breaks and test the element itself. You will need a high quality volt/ohm meter to do all the testing as well as a basic understanding of electrical circuits and voltages. If the elements are heating but not getting hot, also check for 240 volts + - 5% coming from control, If there is proper voltage other test will need to be made, and you can reply with details and I will be happy to respond. I have attached a wiring diagram for you convenience. If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services.Ron H.  

Read More
Ron H -
Sears Technician
May 31, 2013
See more answers
Q:

Burned the coating of the bottom of the oven. Is it safe to still cook in it?

A:

Absolutely safe to cook with.  This is a very common situation that many people find themselves in.  You can attempt to scrape the aluminum off as much as you can but it will have no effect on the oven's function.  To provide a little hope to you,  the bottom of the oven might be replaceable on your model. Look around the bottom of the oven and if you see a few screws through the bottom is most likely replaceable.   I have located a link that will discuss your situation in more detail.  
Click here to view the link.  Though this link discusses a different model number,
the mechanics are likely going to be very similar.Keep in mind that an expert will be
responding within the next two business days if not sooner and will likely offer you more information and
instruction.  I hope this reassures you and have a nice day.

Read More
Henry -
May 10, 2013
A:

Thank you for your question.  I am sorry for the problem with your Kenmofe 790.9210 oven

The oven should still be safe to use.  I am surprised the tray melted.  Were you using the Self Clean feature? 

The bottom oven panel is available but I would suggest a technician install the panel.  You can check the cost of the service call at the following link: Sears Home Services Oven Repair

Thank you for using Manage My Life. 

Read More
Fred M -
Sears Technician
May 12, 2013
A:

One time a fire started in my oven while self cleaning....after we cleaned it up it was fine to cook with! i love my stove :D

Read More
The Harbinger -
May 12, 2013
See more answers
Q:

Would like to know the mfg of a kenmore range with model #,s 790.9210*, 9220*, 9230*, 9240*, Purchased in 2010. Thank you.

A:

I realize it is important for you to know the manufacturer of the Kenmore range. I have located a link with the information you are requesting. I hope this answers your question. If you have any issues with the range, just click on reply with additional details.

Read More
Anna T -
March 01, 2013
A:

Thanks for contacting ManageMyLife.com. All 790 ranges are manufactured by Frigidaire.

Please feel free to let me know if you need further assistance.

Thank you for using ManageMyLife.com.

Read More
Jonathan B -
Sears Technician
March 02, 2013
See more answers