Model #9210 PEERLESS Faucet

  • Two Handle Washerless Kitchen Faucets
    3 Results
Find part by diagram >

Question and Answers

Q:

How do I rremove the pump from the motor? LSQ9210HZ0 Whirlpool Automatic washer

A:

Thank you for choosing sears I would be happy to help you with your washer. Upon researching model LSQ9210HZ0;  unplug the washer power cord before attempting repair or taking unit apart. Once you access the pump, you must remove the clips on the pump securing it to the motor. The clips can be pried off with a flat head screw driver and  turn the upper clip to a 90° degree motion to allow the pump to come off, now you can pull the pump off.


I trust that this information will help you, thank you have a great day.

Read More
CarlosZ -
Sears Technician
May 07, 2015
Q:

craftsman riding lawn mower modet #917.271843 serial #o9210D001800

A:

I'm sorry your having difficulties with the gas tank on your lawn mower. I researched your question and was unable to locate information that will be helpful. An expert will respond within 24-48 hours with a detailed response.

Read More
Jackie S -
January 19, 2012
A:

You can use THIS PRODUCT to make the repair on your fuel tank. You can likely pick this up at any local auto parts store.

It is advised from the manufacturer to replace the fuel tank with part number 188462, which is available HERE . I've repaired lots of them with different epoxies and cements over the years but the tank sealer I linked seems to work the best.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
January 20, 2012
A:

I have this same model and I cannot find a how to on the replacement of the ground drive belt... thanks

Read More
Robert -
May 20, 2014
A:

I have this same model and I cannot find a how to on the replacement of the ground drive belt... thanks

Read More
Robert -
May 20, 2014
See more answers
Q:

Aluminum foil on oven 790.9210

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is trouble with the range.
 
Glad to help out.   Im  looking at your Kenmore model number 790.9210.

I am sorry to hear about putting aluminum at the bottom.   It has happened to many many people.   It is in the manual but always something we see but don't read.  What you need to do is get the bottom cover piece that covers the bake element and I have that on the link below.   There is no way to take care of it except to buy this cover.

BAke element cover for model 790.9210


If you have further questions please let me know.
Thanks for choosing Sears PartsDirect.com
 

Read More
Larry L -
Sears Technician
February 10, 2014