Model #919769010 CRAFTSMAN Power Washer

  • 2400 Psi High Pressure Washer
    3 Results
  • Pump Reakdown
    3 Results
Find part by diagram >

Question and Answers

Q:

Engine stalls when i pull the trigger to release water 919769010 Craftsman Pressure washer

A:

Thanks for the inquiry and for being a valued member.

When the trigger on the wand is not pulled the pump on the pressure washer is bypassing the water and the motor is more or less idling. When you pull the trigger the pump stops bypassing and the pressure builds. The engine is put under a load at this time.

The most likely cause is the main jet of the carburetor is dirty. When this happens, the engine will run fine without a load. With a load the engine starves for fuel and will run rough or die. The carburetor will probably need to be cleaned or replaced to cure the problem. If the carburetor cleaning doesn’t help, the issue could be with the unloader valve on the pump, which is what controls the pressure or bypassing of the water. It can be removed and cleaned, but if that doesn’t help, it could need replacement.

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business.  

Read More
Jeff Wallace Sr -
Sears Technician
July 22, 2015
Q:

need new gun/wand it is leaking badly for this pressure washer 919769010 Craftsman Pressure washer

A:

Thank you for your inquiry on your Craftsman Pressure Washer, Model: 919.769010. From reviewing the details on your model, it appears that the gun and wand are no longer available. At this point in time, I’m not seeing a substitution part for this gun and wand. Since we deal only in OEM parts once the manufacture has is as no longer available there would be no way for use to obtain this specific part.

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day.

 

Read More
Gerry 93 -
Sears Technician
June 05, 2015
A:

Does anyone know who makes this replacement part?

Read More
Scott -
June 06, 2015
See more answers
Q:

Where can i get a handle and wand for a pressure washer that is no longer available? 919769010

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your power washer. Upon researching model 919769010:  the handle and wand for this model have been discontinued and are no longer available, we do not have a replacement substitution.

I trust this information will help you, we appreciate your business thank for choosing Sears.

 

Read More
CarlosZ -
Sears Technician
May 04, 2015