Model #919155310 CRAFTSMAN Power sprayer

  • Sprayer
    3 Results
Find part by diagram >

Question and Answers

Q:

I need a filter for my sprayer;it says it is discontinued;is there a replacement? 919155310 Craftsman Spray gun

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your sprayer. Upon researching model 919155310; once a part is no longer available, it has been discontinued with no substitution.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
July 26, 2015
A:

So what am I suppose to do throw the gun away?

Read More
MArk -
July 26, 2015
See more answers
Q:

Do I need to purchase the additional nozzle, for latex, enamel, and acrylics, for the Craftsman Spray Gun, model 919.155310 to spray my kitchen cabinets?

A:

When using some parts from your appliance I know how important it to have detailed information to make sure the parts are used correctly. While you are waiting for your expert answer, I did manage to find a link in where you can enter your appliance model number and the owners manual will pop up. I hope my link is useful.

Read More
Joseph P. -
June 16, 2011
A:

If the paint that you are using is relatively thick, then you may need to use that 2.0 mm nozzle set. You can try the 1.5 mm nozzle first. If you cannot get a smooth spray using the 1.5 mm nozzle, then you will need to use the 2.0 mm size.

Read More
Lyle W -
Sears Technician
June 18, 2011
See more answers
Q:

I have a craftsman spraygun, model 919.155310. the manual does not address the relationship of the regulator (D25193) and the air adjusting valve (D25192). W

A:

Pressure washers are great tools, they come in handy for so many jobs around the house. We received your question and an expert will respond shortly. Thank you for choosing ManageMyLife!

Read More
Jacqueline S -
August 13, 2010
A:

The air adjusting valve/air volume control knob is used to adjust the air quantity. Turn the knob counterclockwise (CCW) to increase, or clockwise (CW) to decrease the air flow. This adjustment is used for fine tuning and for the various viscosity of paints. The pressure regulator is used to adjust the amount of air pressure at the gun. The recommended operating pressure is 45 psi and DO NOT exceed 100 psi.

Read More
Joey S -
Sears Technician
August 13, 2010
See more answers