Model #919153451 CRAFTSMAN Air compressor

  • Air Compressor Diagram
    3 Results
  • Compressor Pump Diagram
    3 Results
Find part by diagram >

Question and Answers


i have a craftsmanair compressor model #919.153451 it only pumps up to 90 psi and take a long time to get there it supppose to go to 120 psi what is the problem


I'm sorry to hear that you are having some difficulties with your air compressor . I did some research for you at and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. I hope this link provided assist you.

Read More
Jackie S -
November 27, 2011

Locate the air intake filter and remove it. Then empty the tank out and start the compressor. After it has run for a few minutes, hold your hand over the air intake and see if you can feel warm air blowing out of it. If you can, then the reeds are bad in the compressor head and they will need to be replaced. If you do not feel warm air coming from the intake then it may be the piston rings.

Let me know what you find.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
November 30, 2011
See more answers

Top Parts