Model #917388370 CRAFTSMAN Walk Behind Lawnmower, Gas

Find part by diagram >

Question and Answers

Q:

Lawnmower runs for a minute then shuts down. I replace sparks plug, still does the same. Whats the problem. Craftsman Rotary mower

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 14, 2014
Q:

I can't find a gas cap for my lawnmower model 917.388370 917.388370

A:

Good afternoon. I have placed a link from Sears Parts Direct below. The link shows an image of the first model number you have provided. You can do a second search for the second model number by inserting that number in the search box. I hope this is helpful in your search for a gas cap.

Read More
Henry -
September 23, 2012
A:

Item Number 301 - Fuel cap PART NUMBER:: 37844 @ 1st Link below.

Read More
Anonymous -
September 23, 2012
A:

Thank you for posting your question.

I am sorry you are having a problem finding the fuel cap. I looked up the cap for you. The part number is 37844 and can be ordered from the following link.

Read More
James -
November 02, 2011
A:

This is a bit of a complicated problem in that there is no tool or known "easy" way of taking care of this problem.

I have seen the following method used many times: Use a 1/4 self-tapping screw, run a nut up onto the screw about halfway. Use a 5/16 nut to pry on, and get the screw started into the center of the press fitting until you get a good, solid bite. Turn the 1/4 nut onto the larger nut and it will act as a pry point and actually pull the fitting out. Once you've gotten it out, put the new fitting and carb into a shop vice and apply steady even pressure on the fitting and face of carb until it squarely presses the fitting into the press-in port.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
November 03, 2011
See more answers

Top Parts