Model #917386130 CRAFTSMAN Walk Behind Lawnmower, Gas

  • Replacement Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Need picture of how the throttel switch should be hooked up to the two wires coming to it 917386130 Craftsman Rotary lawn mower

A:

I found for an image of the throttle lever assembly. It appears there are only 2 holes to put the wires in. I recommend to just reverse the wires and make sure nothing else came loose between the throttle assembly, governor and carburetor.

I recommend to take the lawn mower into the nearest repair center if you are unable to make this repair.

Thanks for using Sears PartsDirect.

Read More
Tamara T -
Sears Technician
October 28, 2014
Q:

Craftsman Walk Behind lawnmower Carbarator Linkage

A:

I know how important it is for you to have the correct information. I would suggest providing more detail about your question. Just add to this thread. An expert will respond shortly with a detailed response. Have a good day.

Read More
Jackie S -
April 20, 2012
A:

Hi John,

Thank you for submitting a question to Manage My Life.

I assume you want to know how to replace the linkage. I am including an image below that shows this procedure.

If you do not feel confident repairing this problem yourself, then you can have it repaired by a Sears technician. Here is a link that will provide the nearest drop-off locations: Sears Home Services .

Here is a link that you may use to view the parts list diagram or purchase any parts needed for your lawn tractor; Sears Parts Direct .

I hope this is helpful, and if I may be of further assistance please include more details in a reply to this post.

Landell

Read More
Landell -
Sears Technician
April 23, 2012
A:

Here is a larger image.

Landell

Read More
Landell -
Sears Technician
April 23, 2012
A:

Sounds like a stupid question but do you have any advice on how to open your image in a way that I can see it?

Read More
jim -
October 25, 2014
See more answers
Q:

reinstall carb 917.386130

A:

Getting the carburetor installed and properly working is very important. I did some research on your model number but was not able to locate information on reconnecting the linkage. Your expert will be able to help answer your question. It may take 24-48 hours. Thank you for your patience.

Read More
Marc -
September 23, 2012
A:

Thank you for posting your question.

I am sorry you are having a problem with the inflator. I know it can e difficult to remove the hose from some tires. You can install a new chuck on the end of the hose. I tried to find an adapter but did not have any luck. I was able to find some clip on styles that should work but you have to cut the old chuck off first. Click here to be taken to the site that sells the clip on chucks.

I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage My Life!

Mark T.

Read More
Mark T -
Sears Technician
September 24, 2012
See more answers

Top Parts