Model #917386020 CRAFTSMAN Walk Behind Lawnmower, Gas

  • Replacement Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

carburetor

A:

The lawn mower is great for getting work done around the yard. The problem with the carburetor pulsating can be problematic. I found some information for you that I am hoping will help you out. Please click here:[Lawn Mower Pulsates]. Your expert will be able to help answer your question. It may take two business days for your expert to reply. I do hope that everything works out.

Read More
Marc -
July 15, 2013
A:

This is likely due to the main jet not being clean enough. Pull the carb down and use a torch tip cleaner to clean the hole in the jet. I run into this with some of the newer Honda engines and the tip cleaner works great.

Thank you for using Manage My Life!

Read More
Wade_B -
Sears Technician
July 17, 2013
See more answers
Q:

I need the spark plug gap for model mower 917.386020 917386020 Craftsman Rotary lawn mower

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Marc -
May 08, 2013
A:

The plug gap is .030 inch. Good Luck

Read More
Anonymous -
May 09, 2013
A:

Thanks a lot, assumed it was .30 but wanted to be sure. Thanks again for help.

Read More
1BigDog2 -
May 09, 2013
A:

Thanks for contacting ManageMyLife.com. I see you were provided the gap of .30. Thanks for your assistance.

Please feel free to let me know if you need further assistance.

Thank you for using ManageMyLife.com.

Read More
Jonathan B -
Sears Technician
May 09, 2013
See more answers
Q:

Tecumseh Engine 143.964008, Need diagram of how to connect the 2 wires from the new carburetor to the fuel connector. Send to jpbflittle@tds.net

A:

I don't think I understand your question. I am assuming the to links that attach to the throttle plate on the carburetor. We don't have diagrams for each engine. Different carburetors are used on the engines and we don't know what the governor linkage looks like on each engine.

When the carburetors are disconnected a picture should be taken of the linkage connection. If no digital camera is available a drawing of the connection will work.

I am sending you 3 images of different carburetor linkage connections. Look for the one closest to yours and connect the linkage accordingly. You might have to move the links several times to get it right.

Read More
Jimmy K -
Sears Technician
May 07, 2010

Top Parts