Model #917384500 HUSQVARNA Walk Behind Lawnmower, Gas

Find part by diagram >

Question and Answers

Q:

How do I install a new carburetor, for a Husqvarna walk behind gas Lawn Mower ( Model 917.384500 ) ?

A:

I know how important it is to have a good working Mower in your home so that you can keep your grass maintained. While you are waiting for an expert answer, I did manage to find a link that will provide you with some good information similar to your issue.

Read More
Priscilla V -
August 10, 2011
A:

This is a pretty simple procedure on this engine. Remove the air filter cover and then the air filter. Once the air filter is out of the way you should notice 2 screws just beside the opening; remove those screws. When you are taking the filter housing off notice the breather hose on the back side and pull it free of the filter housing.

The carburetor will most likely be free at this point, pay attention to the gaskets for when you put everything back. There are linkages on the carburetor that have to be removed as well so be careful not to bend them while taking them loose.

If the carburetor is already off of the engine you can go HERE and use model number GCV-160-AS3A to pull up the parts images and see the "carburetor" page to see the order of the gaskets and spacer behind the carburetor when putting it back on.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
August 10, 2011
See more answers

Top Parts