Model #917383240 CRAFTSMAN Walk Behind Lawnmower, Gas

  • Replacement Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Mower blade adapter 917383240 Craftsman Lawn mower

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your mower and I do understand your frustration. Glad to help out. I'm looking at your model number 9147383240 and make sure the blade is seated on the adapter correctly and that the blade bolt is very tight. If those things are in order, only hitting something will cause problems. That is assuming that there is no damage to the crankshaft itself. If the key way slot in the crankshaft is damaged or deformed then the adapter is not going to work as it should. If you have further questions please resubmit your question for further information. I hope this information helps you.
 
Thank you for choosing Sears PartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
September 19, 2014
Q:

craftsman mower 917383240

A:

It can be pretty frustrating when a lawn mower is unable to start. The ManageMyLife website is a great place to find answers to questions that need qualified and insightful responses. Some of these questions that are asked will need specific research and will be answered by an expert with-in two business days but usually sooner. I found an expert response that may help out. I attached the link below for you.

Read More
James -
June 27, 2012
A:

Thank you for your question on the timing of the coils for the magnet on the fly wheel.

Remove the kill wire (usually a white wire) the goes to the coil/armature and then pull it over to see if you have spark.

If may be that the kill circuit on the side of the engine that is operated by the operator presence handle is not releasing far enough to get off the kill switch.

You can check the magnet on the flywheel with a screw driver to see if it has magnetic draw.

It just may be that the coil has failed and will need to be replaced.

Spark coil armature for engine on model 917.383240 .

I hope this will help.

Sam A.

Read More
Sam A -
Sears Technician
June 29, 2012
See more answers
Q:

craftsman lawn mmopwer torque spec on flywheel 917383240

A:

Torque specification are very important to have the Craftsman mower running properly. Every mode has its own specifications by model, thank you for your patience while an expert responds to your specific model.

Read More
Anna T -
June 27, 2012
A:

Hello Bill,

I would like to assist you with the flywheel torque specification on your mower. This engine should have it's flywheel nut torqued to 35ft lbs.

Please let me know if there is anything further that I may assist you with.

Jerry C

Read More
Jerry C -
Sears Technician
June 29, 2012
See more answers

Top Parts