Model #917378410 CRAFTSMAN Walk Behind Lawnmower, Gas

Find part by diagram >

Question and Answers

Q:

grass deflector 917378410 Craftsman Gas, walk behind lawnmower

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there are parts needed for the lawnmower.
 
Glad to help out.   Im  looking at your Craftsman Lawnmower model number  917378410.

I see why you were having trouble in finding something that wasn't in the picture.   I searched my research program and found the deflector for you.   I have it on the link below.

Grass Deflector for model 917.378410


Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry L -
Sears Technician
May 01, 2014
Q:

Sears walk behind lawn mower model 917.378410 part no 640259 priming bulb and retaining ring. QUESTION: How to remove the retaining ring?

A:

Having to work on your Mower can be challenging. I have taken the time to research on the Manage My Life website and have located a link that is similar to your issue. While you are waiting for a detailed reply from an expert I have attached the link below.

Read More
Priscilla V -
September 29, 2011
A:

You can use a flat head screwdriver to pry out the retaining ring for the primer bulb. You can also try to use needle nose pliers to pull it out as well, but I've found that the screwdriver seems to work best.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
October 01, 2011
See more answers
Q:

I HAVE A EAGER 1 6.75 CRAFTSMAN MULCHER MODEL # 917378410. IT STARTS PERFECT BUT WILL NOT MOW ON A BANK. IS THERE A CUT OFF SWITCH FOR ANGLES.

A:

Hey there. I know how frustrating it is for your Eager 1 6.75 Craftsman Mulcher to not work properly. When I need help finding a part for my yards tools I go to SearsPartsDirect.com I have provided you with the link below. Hope this helps!

Read More
Salina L -
June 28, 2010
A:

There is no tilt/cut off switch that would shut the engine off when mowing on an incline. If you were able to mow on the steep angle before and it never died and now it does would most likely be caused by a dirty carburetor. You may also have an issue with the "operators presence" bar/cable not pulling the cable far enough to keep if from killing the engine too.

Read More
Joey S -
Sears Technician
June 30, 2010
See more answers

Top Parts