Model #917378361 CRAFTSMAN Walk Behind Lawnmower, Gas

Find part by diagram >

Question and Answers

Q:

What is the armature gap for Craftsman 917.378361 mower? 917.378361 Craftsman

Q:

i hit a stump while mowing think i need to replace part #46 917378361 Craftsman Rotary mower

A:

Referring to part #46 on the diagram of your lawn mower, I see you are referring to the blade adapter. There is no special way to remove these, they're attached to the drive shaft by the bolt that also holds the blade on and held in one direction by the key built into the adapter. Once the bolt, blade and washers are removed the adapter should slip off. I say should because sometimes a bit of rust can build up between the shaft and adapter and you may need to use a penetrating fluid like Liquid wrench or Blaster and tap it a few times with a wrench or hammer. Hope this helps!

Read More
Brandon8726 -
Sears Technician
September 02, 2015
Q:

pulley dust cover under mower wont stay attached 917378361 Craftsman Rotary mower

A:

Thank you for choosing SearsPartsDirect.com. I will be more than happy to assist you. I can understand any frustration you may have experienced with regards to your unit. Let’s see what we can do for you.

With this pulley cover I’m showing there should be a spot for a screw to help hold it on, and keep it secure. If this spot for the screw as broken off then the pulley cover would need to be replaced. The part number for the new cover is 532190754.

Hope this information has helped you. If you are not comfortable doing this repair you can click here to schedule a technician or call toll free 1-800-469-4663. Again, thank you for choosing SearsPartsDirect.com.

 

Read More
JeffwallaceIII -
Sears Technician
April 28, 2015

Top Parts