Model #917377532 CRAFTSMAN Walk Behind Lawnmower, Gas

Find part by diagram >

Question and Answers

Q:

remove debris shield 917377532 Craftsman Rotary mower

Q:

How do I change the gears on my model 917-377532 Lawn mower ?

A:

Needing help on how to trouble shoot your tool owners manuals are the greatest things to have. I took some time to search the Manage My Life website and found your owners manual. I have attacehd the link below. Hope this helps!

Read More
Dezeray -
September 25, 2012
A:

Hello Robert,

This question is directly related to question number 318748 and is copied below:

I would like to assist you with your mower transmission rebuild question. The case will need to be split and then the worm gear will pull out of the lower housing. The bearings are not pressed on and they usually fall out. I am assuming that this is on the driveshaft (#9) and that it is corroded and stopping the bearings from sliding off. If yours are stuck on the axle, use a penetrating oil and work them off. You may need to use a scrub pad to clean off the axle, with penetrating oil or a cleaner applied, to get them off. I have included a diagram for your assistance.

To reassemble, just put the parts back on in the same order that they came off. It is a good idea to use a digital camera, or a cell phone with a camera, to chronicle the disassembly.

Please let me know if you would like any further assistance.

Jerry C

Read More
Jerry C -
Sears Technician
September 27, 2012
See more answers
Q:

How do I change the gears on my model 917-377532 Lawn mower?

A:

Replacing the gears on the Craftsman lawn mower can no be an easy job. Good to know there is help on managemylife.com. I hope the link provided below is helpful while waiting for specific information on your specific model.

Read More
Anna T -
September 25, 2012
A:

Hello Robert,

I would like to assist you with your mower transmission rebuild question. The case will need to be split and then the worm gear will pull out of the lower housing. The bearings are not pressed on and they usually fall out. I am assuming that this is on the driveshaft (#9) and that it is corroded and stopping the bearings from sliding off. If yours are stuck on the axle, use a penetrating oil and work them off. You may need to use a scrub pad to clean off the axle, with penetrating oil or a cleaner applied, to get them off. I have included a diagram for your assistance.

To reassemble, just put the parts back on in the same order that they came off. It is a good idea to use a digital camera, or a cell phone with a camera, to chronicle the disassembly.

Please let me know if you would like any further assistance.

Jerry C

Read More
Jerry C -
Sears Technician
September 27, 2012
See more answers

Top Parts