Model #917376571 CRAFTSMAN Walk Behind Lawnmower, Gas

Find part by diagram >

Question and Answers

Q:

How to attach the return spring between belt keeper and gear case? 917376571 Craftsman Rotary mower

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you in locating where the spring connects on your mower.

I have found where the spring connects on your gearbox. You will need to locate that hook on your gearbox itself.

 
You can also visit searpartsdirect.com for parts, diagrams, and repair information.

 

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
May 22, 2015
A:
Natasha12 -
Sears Technician
May 22, 2015
See more answers
Q:

Mower won't run 917376571 Craftsman Rotary mower

A:

Thanks for the inquiry and for using SearsPartsDirect.com.
Sorry to hear of the issue you're having with the push mower not starting, I know how frustrating that is to have occur. 
It sounds like the issue is going to be either spark or fuel. To rule spark out, pull the plug and reattach it to the boot. With a helper ready to pull the rewind starter, ground the base of the plug to the cylinder. Have the helper pull the rope and check the base of the plug for spark. If there is spark, then we can focus on fuel.
The new ethanol mixtures are tough on these carbureted engines. I would pull the carb and do a thorough cleaning on it with carb cleaner, a wire brush, and a bread tie wire to poke through the main jet to clean it. After cleaning, douse liberally with carb cleaner. You may just have a partially clogged fuel jet that is starving the engine of fuel. 
Hope these suggestions help and thanks for using SearsPartsDirect.com. We appreciate your business.

Read More
Jeff Wallace Sr -
Sears Technician
June 23, 2014
Q:

Door mulch installation for mower. 917.376571

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is questions about the parts.
 
Glad to help out.   Im  looking at your Craftsman Lawnmower model number  917.376571.

Picture of the mulch plug for the model 917.376571.

The hinge/rod number 45 slides on the under side of the mulch door.  

Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry L -
Sears Technician
May 07, 2014
A:

Spring P/N 42 needs to be "in tension(spring loaded)" in order for the mulch door to be held shut. i can get the door, rod & spring installed but without the spring in tension - the door just flaps open the moment the mower is tarted. Please provide instruction on how to load & install the spring. It seems so simple but just doesn't work! Also, i believe your reply(s) are going into my junk mail & automatically deleted & i didn't know you replied to my question until now, two weeks later when i called customer support. That said, along with the spring install directions, please provide your sender email address so i can add your address to my safe senders list. Thx, David

Read More
dcoppoloPE -
May 19, 2014
A:

i believe the actual spring P/N is ... 193000 Torsion spring CATEGORY: Lawn & Garden/Yard/Farm PART NUMBER: 193000

Read More
dcoppoloPE -
May 19, 2014
See more answers

Top Parts