Model #917376393 CRAFTSMAN Walk Behind Lawnmower, Gas

  • Engine/housing/handle
    3 Results
  • Drive Control/gear Case/wheels
    3 Results
Find part by diagram >

Question and Answers

Q:

Self Propelled Issue 917376393 Craftsman Lawn mower

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your lawn mower. Upon researching model 917376393; the belt may be worn. This could cause it to slip. Check the inside of the tires. They have teeth inside and can wear out.

Thank you for choosing Sears. We appreciate your business. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
August 02, 2015
Q:

MY CRAFTSMAN LAWN MOWER DOES NOT START/STAY ON FOR AT LEAST.

A:

I am sorry that you are having some difficulties with your mower and I will be happy to help. I did some research and I was able to find a link that will guide you in making some checks on your mower. Click here for the link. I hope this helps with your research while you wait for your expert response.

Read More
Joseph P. -
May 09, 2013
A:

Hi,

Thanks for contacting ManageMyLife. I understand how frustrating it is having trouble with your appliance not working.

By what you have stated I suspect the problem is fuel related. The problem could be the fuel supply to the carburetor. To check the fuel flow you will need to move the mower to a well ventilated area. Then use a pair of pliers to remove the fuel line to the carburetor. Place the end of the fuel line into an approved container. Then watch the fuel flow out of the line. You should see a full flow out of the line. If you do have a good flow, the problem is likely in the carburetor. I have found a video that shows how to clean the carburetor. Click here to watch the video.

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Bill

Read More
Bill__W -
Sears Technician
May 11, 2013
See more answers
Q:

Loss of Drive speed & power on my Craftsman Rotary lawn mower

A:

The loss of drive and speed on the lawn mower can be frustrating. I did some research on www.managemylife.com and found questions similar to yours. I am adding a couple of links below to help you with your question while you wait for your expert response.

Read More
Marc H -
February 26, 2012
A:

With the engine off, remove the front wheels to the mower. I recommend starting with the right side since that side seems to be the more troublesome side. With the wheel off, inspect the drive gear and the teeth on the backside of the wheel. Those teeth should mate up good with the little drive gear. Because the teeth are plastic material they will wear out over time.



Let me know what you find with this. I feel fairly certain you will find the teeth on the wheel worn down and you'll need to get a new wheel. You can go HERE with the model number to order a new front wheel if that is indeed the cause of this situation.



Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
February 27, 2012
See more answers

Top Parts