Model #917376221 CRAFTSMAN Walk Behind Lawnmower, Gas

  • Engine/housing/handle
    3 Results
  • Drive Control/gear Case/wheels
    3 Results
Find part by diagram >

Question and Answers

Q:

Mower will not start after hitting tree root 917376221 Craftsman Lawn mower

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 14, 2014
Q:

Craftsman 917.376221 will not restart after hitting tree root and stopping.

A:

Thank you for your question.

 

I am sorry you are having a problem with the mower. If the mower will not start after hitting a root, I suspect the flywheel key is sheared. I found a previous answer that explains how to repair this problem. Click here to be taken to that answer.

If you need to order the flywheel or blade, you can do so from the following link. Replacement parts for a Craftsman mower model 917376221.

 

I hope this is helpful. Please let me know if you need further assistance.

 

Thank you for using Manage my life.

Mark

Read More
Mark T -
Sears Technician
November 19, 2013
Q:

how to repalce spring on mulch door

A:

Installing the spring on the mulch door may seem like a difficult task without the instructions.  I have taken some time to research your question here on the Manage My Life website and I noticed that someone else had asked a similar question with a posted response from an expert. Have a nice day!

Read More
Yadira B -
May 08, 2013
A:

I cannot find a video of this installation anywhere. I have attached a photo to assist though. You will need to make sure the spring is arranged similar to how the one in the photo is. In order to this, you'll need to start installing the pin but do not push it all the way across. So the pin will need to be in one side, through the side of the flap, through the spring and then set the spring into place. The spring will try to push the whole thing to where it's hard to finish getting the pin installed, so just be patience and use a hammer to tap it (don't beat on it, even though it can make you want to) all the way through the other side of the flap and into the other mounting hole.

Thank you for using Manage My Life!

Read More
Wade_B -
Sears Technician
May 10, 2013
See more answers

Top Parts