Model #917376151 CRAFTSMAN Walk Behind Lawnmower, Gas

Find part by diagram >

Question and Answers

Q:

looking for pinion that is not a 750003.

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
James -
October 12, 2011
A:

I really don't have a way to track down a part based on the description of it. Everything in our system is driven by model numbers and/or part numbers rather than sizes and/or descriptions.

Do you have the model number from the mower in question (from the sticker)? Has the transmission been changed on the mower to a transmission from another machine? If so, do you have the model number from that mower?

For what it's worth, I do show that the pinion changed part numbers on the model number that you did give me. There was a service bulletin that came out and the pinion changed to part number 403849 but the pin/pawl that drives it did not change so that part of the situation has stayed the same.

Let me know on the model number and I'll see what I can come up. Also, if you have a part or model number from the transmission we're working with I can come up with a pinion for it.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
October 13, 2011
See more answers
Q:

Debris shield was taken off and it will not fit back on when I match up the screw holes. What am I doing wrong? I have a craftsman mower.

A:

The parts list diagram for this mower is shown in the image below. Make sure that you have the belt keeper (Key 73) in place. With the blade removed, you should be able to match up the holes and install the debris shield (Key 62). I am not sure what type of trouble that you are having when reinstalling this part. If you need more help, resubmit your question with additional details regarding how the debris shield will not fit.

Read More
Lyle W -
Sears Technician
May 25, 2010
Q:

My self propelled lawn mower, model 917376151 wheels lock up when engaging the drive. I replaced the belt, same result. Could it be the transmission?

A:

Remove the belt cover and don't start the engine. Get someone to engage and disengage the drive while you watch the end of the drive cable on the gearbox. Watch item 76 while the drive is being engaged and disengaged. Item 76 should rotate, see if you can rotate it by hand.

If item 76 is moving fully and nothing is broken or out of place, the gearcase is the problem.

Read More
Jimmy K -
Sears Technician
November 11, 2009

Top Parts