Model #917375630 CRAFTSMAN Walk Behind Lawnmower, Gas

  • Engine/housing/handle
    3 Results
  • Drive Control/gear Case/wheels
    3 Results
Find part by diagram >

Question and Answers

Q:

Blade adapter #189179 917375630 Craftsman Mower

Q:

attach mulcher door 917375630

A:

Thank you for the inquiry and for using SearsPartsDirect.com. 

You will want to remove the bracket from the mower deck before attaching the pin through torsion spring, it will make the job much easier. Once you have the pin through the spring and attached to the mulcher door, you will just set the bracket into the deck holes and secure down with the nuts. You will need to make sure the spring is arranged similar to how the one in the photo is.

I have attached some images below so give you some reference. If you are viewing this response on SearsPartsDirect.com, click here to see my response on ManageMyLife.com with attachments. Hopefully this helps with the installation.

Thanks for using SearsPartsDirect.com.  

 

Read More
Jeff Wallace Sr -
Sears Technician
October 01, 2013
A:

I got the spring on the door, but I can't keep tension tight

Read More
Francis -
October 01, 2013
A:

Thanks for the response. The torsion springs can be a tricky install, especially with the tension. 

You will have to hook the spring on the deflector first. Then tension the spring and try to hold it into position. While you have it held, you will have to set the entire assembly onto the bracket and hold it there with the one hand. Once it's on the bracket, you can slide the pin through all the parts.

I have added another picture below giving a better illustration of the spring. Once again, if you don't see the attachment, click here to see it. 

Hopefully this will help get it all in place for you.  

Read More
Jeff Wallace Sr -
Sears Technician
October 02, 2013
A:

Thanks Josh

Read More
Francis -
October 04, 2013
See more answers
Q:

attach mulcher door 917375630

A:

Thank you for the inquiry and for using SearsPartsDirect.com. 

You will want to remove the bracket from the mower deck before attaching the pin through torsion spring, it will make the job much easier. Once you have the pin through the spring and attached to the mulcher door, you will just set the bracket into the deck holes and secure down with the nuts. You will need to make sure the spring is arranged similar to how the one in the photo is.

I have attached some images below so give you some reference. If you are viewing this response on SearsPartsDirect.com, click here to see my response on ManageMyLife.com with attachments. Hopefully this helps with the installation.

Thanks for using SearsPartsDirect.com.  

Read More
Jeff Wallace Sr -
Sears Technician
October 01, 2013

Top Parts