Model #917374350 CRAFTSMAN Walk Behind Lawnmower, Gas

  • Engine/housing/handle
    3 Results
  • Drive Control/gear Case/wheels
    3 Results
Find part by diagram >

Question and Answers

Q:

How do I replace the blade adapter #421782 on my Craftsman mower model #917374350 ? 917374350 Craftsman Mower

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is parts to be replaced on the lawnmower.
 
Glad to help out.   Im  looking at your Craftsman Lawnmower model number  917374350.

I see you are looking to replace the blade adaptor and have it on the link below.   All you should have to do is take the bolt off the blade and then just pull the blade and the blade adapter off.   The blade adapter is held on by a key way so you need to be careful how it is removed.   I have below the key way and the blade adaptor for this lawnmower.

Blade adaptor for model 917.374350

Keyway from engine model 
128T02-1270-B1   


 Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry L -
Sears Technician
May 19, 2014
A:

Tell me how the adapter stays on. Mine just slides right off. Blade stays on just fine. Do I need to twist it or something?

Read More
Tracy -
June 19, 2015
A:

I have a craftsman push mower and need to replace the blade adapter 421782. I received replacement part 581473301. The old part had grooves in the center for a bolt. The new part does not. Can you tell me how to install it?

Read More
Melissa -
October 01, 2015
See more answers
Q:

How do I adjust the handle on my lawn mower?

A:

According to the model number submitted the users manual shows that you must remove the knobs and carriage bolts in order to adjust the handle position. (See image below)

Read More
Joey S -
Sears Technician
April 28, 2009
A:

Thanks Joey, but mine does not have a know and carriage bolts. That's why I am confused. I also does not have the 3 adjustment holes.

Read More
julia760 -
September 13, 2012
A:

Oops! That was a KNOB and carriage bolts in the first sentence.

Read More
julia760 -
September 13, 2012
See more answers
Q:

Need a "Mulch Plug"

A:

When it comes to needing parts for your appliance or tool, the best website for parts is Sears Parts Direct website. I have attached the link below so you can speak with a Sears associate to find the part you need. Have a nice day!

Read More
Dezeray S -
April 17, 2012
A:

I know that the parts for the lawn mower can be very confusing. However, this model does not have a mulch plug, it has a mulch door. When the mulch door (key # 33 on the image below) is closed and locked, the mower will mulch. If it is unlocked and open it will not. If this is not working then you will need to replace the door. You can order parts from this link: Sears Parts Direct . If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
April 19, 2012
See more answers

Top Parts