Model #917372270 CRAFTSMAN Walk Behind Lawnmower, Gas

  • Handle/engine/housing
    3 Results
  • Drive Control/gear Case/wheels
    3 Results
  • Rewind Starter
    3 Results
  • Replacement Parts
    3 Results
  • Replacement Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

How to fix an old carburator?

A:

Replacing the carburetor on a Craftsman lawnmower can be a tedious job but with patience it can be accomplished. The expert will be with you shortly with an answer to you specific question.

Read More
Anna T -
April 13, 2012
A:

Thank you Anna for those links. Unfortunately, the diagram shown is at the wrong angle to determine in which hole the link rod inserted on the throttle. It is very detailed question, but one I needed to ask because I have used the trial and error method without success. This is my first time using ManageMyLife website. Was your response the "expert" response that I am awaiting? Please let me know if there is another expert response on its way. Thank you.

Read More
William -
April 14, 2012
A:

Thank you for your question.

I am sorry you are having a problem with the mower. The multiple holes on the top of the throttle plate are for other applications. I have posted an image below that shows how the linkage is connected and throttle linkage is connected to the governor arm. Just click on the image to enlarge it.

I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark.

Read More
Mark T -
Sears Technician
April 16, 2012
A:

Thank you Mark T. The image you posted was detaied enough for me to determine the correct linkage and you answered all 4 of my questions. I should have noted the correct configuration when I removed the carburator, however, the throttle was concealed by the speed lever bracket, so I did not see which hole it belonged in. Your help is greatly appreciated. William

Read More
William -
April 18, 2012
A:

I am glad the information was helpful. Please keep us in mind if you have any other problems around the house. Thank you for using Manage My Life! Mark T.

Read More
Mark T -
Sears Technician
April 19, 2012
See more answers
Q:

Mower blade substitution

A:

I know that having the right parts is very important. However, after some research, I was unable to locate the information you need. The expert will answer within 24-48 hours with more detail. Thank you for using Manage My Life.

Read More
aashe -
February 13, 2012
A:

The 4 blade part numbers you sent all change to part number 406713. The holes in the blade are the same as the 141114 mulching blade. If the 141114 mulching blade is a 22 inch blade, the blades will interchange.

Read More
Jimmy K -
Sears Technician
February 14, 2012
See more answers

Top Parts