Model #917372260 CRAFTSMAN Walk Behind Lawnmower, Gas

  • Gear Case Assembly 88387
    3 Results
  • Main Frame
    3 Results
  • Drive Assembly
    3 Results
Find part by diagram >

Question and Answers

Q:

remove n replace the link,governor to throttle and the governor spring 917.372260

A:

If you haven't ordered the parts, then you will need to order them off of the parts listing for the engine (engine model 143384092). Here is a link to the parts list diagram for that engine  Engine Model 143.384092 Parts Diagram.

 

Here is a link for a video that shows the linkage and how to adjust it:  http://www.youtube.com/watch?v=nzf8GX8BjdY

 

That information should help you replace those components on the engine. If you need more assistance, let us know. 

Read More
Lyle W -
Sears Technician
November 08, 2013
Q:

How do I replace the "Gear Case" on my 917.372260 mower?

A:

You'll need to remove both front wheels and the wheel adjusters. After you do that, you can remove the bolt holding the transmission near the pulley. Then slide the transmission to the right and the left side will drop out of the hole, then pull it back the other direction to drop it out of the other hole. Done. Simply install the new one in pretty much the reverse order. I know I make it sound easy. If you've never done it before it can be a little bit of a headache, but it's not too hard of a job to do.

Read More
XX Wade_ -
Sears Technician
April 24, 2009

Top Parts