Model #917372200 CRAFTSMAN Walk Behind Lawnmower, Gas

  • Main Frame
    3 Results
  • Drive Assembly
    3 Results
Find part by diagram >

Question and Answers

Q:

gas to oil ration for my lawn mower

A:

When making repairs on an appliance, Manage My Life is here to help. While you are waiting for your expert answer, I did manage to find a link that will provide you with some good information to help you with your question. I hope my link is useful.

Read More
Joseph P. -
June 20, 2011
A:

This link did not help. It is not the right model #

Read More
Tim -
June 21, 2011
A:

I will need the model number from the engine. The mower model number you gave is for a mower with a 4cycle engine on it. The fuel and oil do not get mixed on a 4cycle engine, only on a 2cycle.

If you cannot find any kind of a model number on the engine I'm afraid I won't be of much help as I have no way to identify the engine.

It could just be a gas cap from something else. Is there a dipstick for oil? If so, then disregard what the cap says and put regular unleaded gas in the fuel tank and make sure the oil is full with 30 weight high detergent motor oil.

You may reply back to me here on this thread.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
June 21, 2011
A:

Thank you Wade B. I believe that you are right. The mower has a dip stick for oil. As you stated that is for a 4 cycle engine. Must have the wrong gas cap. I will use regular unleaded gas in the fuel tank and 30 weight high detergent motor oil only in the oil reservoir. Thanks again. You were a great help.

Read More
Tim -
June 21, 2011
A:

Glad to be of service. If you have any other problems with it just stop by and let me know.

Read More
XX Wade_ -
Sears Technician
June 21, 2011
See more answers
Q:

craftsman lawn mower 4.0 HP model 917.387120 What is the oil ratio?

A:

Please do not mix oil and gas on this model. If you do, you will have all kinds of terribly problems with the engine. This is a standard 4stroke engine. The gas goes in the gas tank and the oil goes in the engine block. The engine requires regular unleaded gas and 30weight oil (about 20ounces) in order to work as designed.

Read More
XX Wade_ -
Sears Technician
May 05, 2009
A:

That is not the model # of my mower. It is 917372200. And on the gas cap it states to mix oil with the gas

Read More
Tim -
June 21, 2011
A:

What would this ratio be for this model

Read More
Tim -
June 21, 2011
See more answers

Top Parts