Model #917370734 CRAFTSMAN Walk Behind Lawnmower, Gas

Find part by diagram >

Question and Answers

Q:

mower model # 917370734 replacing drive control cable assembly cannot remove old cable (spring end) from drive cable anchor. pls send instructions . anchor

A:

Manage My Life is a great website to speak directly to an expert who can help you every step of the way to solving the problem you are having. An expert shall have an answer to your question within 24 to 48 hours. Have a great day.

Read More
Alina F. -
July 09, 2011
A:

Thank you for your question.

To remove the cable from the anchor you have to squeeze the tabs on the housing. Once the tabs are pushed, pull the cable free from the anchor. The image below shows the area of the tabs. I hope this is helpful.

Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
July 11, 2011
A:

Thank you for your question.

To remove the cable from the anchor you have to squeeze the tabs on the housing. Once the tabs are pushed, pull the cable free from the anchor. The image below shows the area of the tabs. I hope this is helpful.

Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
July 11, 2011
See more answers
Q:

Craftsman keystart lawn mower w.new battery won't start when key turned starts fine w pull start. Sears has no wiring diagram How to isolate cause?

A:

From the key start follow the wiring harness to the quick disconnect; unplug the harness at that point & use an insulated jumper wire that will fit in the terminals. If the unit starts you will need to replace the key start assembly part number 194953 that comes with the wiring harness www.searspartsdirect.com If the mower will not start you will need to check the battery; the battery should read 12.6DC volts on a meter. Other possibilities; starter & wiring harness problems. The Mfg does not supply a wiring diagram for products like this with basic simple wiring.

If you do not feel confident repairing this problem yourself, then you can have it repaired by a Sears technician. Here is a link that will provide the nearest drop-off locations: Sears Home Services .

Read More
biker dave -
Sears Technician
May 14, 2010

Top Parts