Model #917295551 CRAFTSMAN Rear Tine, Gas Tiller

  • Handles
    3 Results
  • Mainframe, Left Side
    3 Results
  • Mainframe, Right Side
    3 Results
  • Transmission
    3 Results
  • Tine Shield
    3 Results
  • Tine Assembly
    3 Results
  • Decals
    3 Results
Find part by diagram >

Question and Answers

Q:

where to put oil in transmission

A:

I'm sorry that you are having difficulties with your tiller. I did some research for you at managemylife.com and found an expert answer to a similar question that may assist you until your expert can respond. I also found an article on maintenance that may be useful. I have attached these links below.

Read More
James -
February 01, 2011
A:

Thank you for your question.

I have checked the model number you have submitted. The transmission does not require any additional lubrication. The transmission has grease (plastilube #1) installed in the factory. If you have opened it for service you should only use plastilube #1 before putting it back together. the part number is 6066J. Heavily coat all of the gears and chains along with filling one-half of the case. I also recommend using a light coat of silicone sealer on the gasket before putting it back together. I hope this is helpful.

Please let me know if you need further assistance with this issue.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
February 02, 2011
See more answers

Top Parts