Model #917293200 CRAFTSMAN Rear Tine, Gas Tiller

  • Handles
    3 Results
  • Mainframe, Left Side
    3 Results
  • Mainframe, Right Side
    3 Results
  • Transmission
    3 Results
  • Tine Shield
    3 Results
  • Tine Assembly
    3 Results
  • Decals
    3 Results
Find part by diagram >

Question and Answers

Q:

clevis pin 917 293 200

A:

Thanks for the inquiry and for using SearsPartsDirect.com.
Sometimes we can locate the specs for hardware pieces including shear pins, but I was unable to locate the specific specs for this particular one. It appears the manufacturer hasn't release the specifications. The part number you would need for the shear pin is 132673 and the cotter pins are part number STD624008, and are offered in a 2-pack. 
For convenience, I have included links below for both parts mentioned above. Just click the blue link to be directed to SearsParts to view and purchase the hardware pieces when needed.

Shear Pin for Tiller 917293200

Cotter Pin for Tiller 917293200

Hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
May 28, 2014
Q:

Won't go into gear 917293200 Craftsman Tillers

A:

Thank you for your question.

 

 

 

I am sorry you are having a problem with the tiller. If the transmission is in neutral and will only move a few feet there is a problem with transmission. To make sure I recommend trying to shift the transmission. On the side of the transmission case, near where the shifter goes in, you will notice a silver colored rod end. It will be flush or almost flush with the side of the transmission case. Take your 3-n-1 oil and cover the end of that shaft with the tiller tilted a good bit on it's side. Try working the shifter. You can even tap on that silver shaft end while working the shifter to see if you can pop it into gear that way. Usually once you get it back into a gear you can add grease to the transmission and be ok. I have also took a smallish hammer and pecked at the top of the shifter shaft where it goes into the transmission while working the shifter. Sometimes, they just do not come unstuck and the transmission will have to be repaired or replaced. If you do manage to get it unstuck I would for sure recommend putting some grease in the transmission when done. Please let me know if you have any further questions. Here is a link to order any parts you need. Sears Parts Direct .

 

 

 

 

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

 

 

Thank you for using Manage my life.

 

 

Mark T.

Read More
Mark T -
Sears Technician
September 03, 2013
Q:

Bearing shaft ground drive

A:

This do-it-yourself-repair may be time consuming, but with help from the experts its possible. Below is a link that may be helpful while waiting for an expert answer.

Read More
Anna T -
April 18, 2012
A:

Thank you for your question.

I will be happy to assist you. I looked up the model number you have submitted. To install the bearings you have to split the case open. The reason is the bearing has a shoulder on the inside that prevents it from coming out. I was able to find an accurate picture of the bearing and posted it below just click on the image to enlarge it.

If you are going to replace the bearings, be sure to pictures to aid in reassembly. The reason is if you for get we cannot help. The manufacture never released a repair manual for this transmission.

I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
April 19, 2012
See more answers

Top Parts