Model #917276863 CRAFTSMAN Lawn, Tractor

Find part by diagram >

Question and Answers

Q:

917276862 throttle spring 917276863

A:

Thanks for the inquiry and for being a valued member.

To help you with the spring placements, I've added some photos below that will hopefully help.






I hope these help and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
June 30, 2015
Q:

I need to know the high and width of the lawn tractor deck shoot opening. It a craftsman model 917276863 917276863 Craftsman Tractor

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.”

 

Read More
Natasha12 -
Sears Technician
December 05, 2013
Q:

Can't get my lawn tractor started (Model 917.276863) - new battery, new fuel filter, new plug - is there a fuse I should check?

A:

It can be extremely frustrating trying to get things done around the yard and your tractor fails on you. I did some research and provided a link to a similar question and answer on our site. I hope this will shed a little more light on the issue until the Expert responds to your question in more detail within 24 to 48 hours.

Read More
Julio -
October 11, 2012
A:

If the engine spins when you try to start (but does not start) then the fuse and solenoid are doing what they should be doing. You may need to remove the engine shroud and take the "kill" wires loose from both ignition modules. With the kill wire removed, try to start the engine and see if it fires up. If the engine starts then it's most likely going to be the diodes in the kill wires on the engine harness.

Let me know what you find.

Read More
Wade_B -
Sears Technician
October 12, 2012
See more answers

Top Parts