Model #917276814 CRAFTSMAN Lawn, Tractor

Find part by diagram >

Question and Answers

Q:

engine gasket set 917276814 Craftsman Tractor

A:

Thank you for choosing sears I would be happy to help you with your tractor. Upon researching model917276814; I have posted a link below of the engine gasket set for you model.

I trust this information will help you, have a great day.

Read More
CarlosZ -
Sears Technician
January 08, 2015
Q:

OIL filter, air filter, and spark plug.??

A:

I know how important it is to have the correct parts for your Craftsman tractor.  For a parts breakdown of the Briggs and stratton engine for model 917.276814, go to searpartsdirect.com and type in the model number for the engine:  31P977-0635-E1.  Hope this is helpful while an expert responds with additional information.

Read More
Anna T -
May 14, 2013
A:

When you searched for your manual you should have seen this - Find parts for your model number at Sears PartsDirect: 917276815, 91727681, 917276813 view more If you were to "click" - view more - you would have seen - Find parts for your model number at Sears PartsDirect: 917276815, 91727681, 917276813, 917276814 hide

Read More
Anonymous -
May 14, 2013
A:

Thanks Anna That helped tremendously .

Read More
Jim -
May 14, 2013
A:

Thank you for your question and I understand your concern.

You can look up and order the engine parts for engine model 31P977-0635-E1  at Searspartsdirect.

 The oil filter is part # 696854

The air filter is part #  795115 

The spark plug is part #  RC12YC 

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post. 

Read More
Joey S -
Sears Technician
May 15, 2013
See more answers
Q:

Craftsman Lawn-Tractor 917276814 purchased 2008 Houston, Texas Drive Belt is loose and right blade does not turn or cut when engaged.....

A:

I understand you wanting to make the repair as painless as possible. Replacing the belt is is not that expensive if you are doing it yourself. I am providing a few links that may be helpful while an expert responds to your specific model questions. Thanks for your patience.

Read More
Anna T -
July 24, 2012
A:

The belt could be the problem but it's not likely since when that normally happens the belt doesn't really appear all that loose.

What I suspect has happened is that the actual clutching mechanism on the mower deck is sticking. If you notice the small pulley on the left side of the deck (not the one the blade connects to, but the other). There is a little bracket that that pulley mounts to. The little bracket is held onto the mower deck with a bolt/nut. The nut can be seen just in front of the pulley. Loosen that nut about 4-5 turns and then oil that area. The area there is the pivot for the PTO clutch assembly. Once you oil it up, tighten the nut back until it is just slightly snug and engage the blades with the tractor off. Since the engine is off, you can grab the belt and push it back/forth. You will notice that the right idler (the other little pulley) will move when you do this. The movement of that idler will cause the oil to get down into the pivot area.

Now start the engine and see if the blades will come on and cut normally. If they do, shut the engine down and then tighten that nut just a little bit more and then you can go ahead and mow as usual. If the problem still exists, let me know and we'll into some other stuff that may be going on.

Thank you for using Manage My Life!

Read More
Wade_B -
Sears Technician
July 24, 2012
See more answers

Top Parts