Model #917259730 CRAFTSMAN Lawn, Tractor

  • Electrical
    3 Results
  • Chassis And Enclosures
    3 Results
  • Drive
    3 Results
  • Steering Assembly
    3 Results
  • Lift Adjustment
    3 Results
  • 38" Mower
    3 Results
  • Transaxle
    3 Results
Find part by diagram >

Question and Answers

Q:

Can I return a Jackshaft that is unused that I purchased last month? 917259730 Craftsman Lawn, tractor

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Julio -
May 14, 2013
A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Julio -
May 14, 2013
A:

I can understand how important it is to have the right information for your lawn tractor. You can return the jackshaft that you purchase for the mower. We have a 90 day return policy for all parts. Just call 1-800-469-4663 to make these arrangements. Once the part has been received, then you will get the refund. I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
May 15, 2013
See more answers
Q:

Position of thrust washer on shaft for steering

A:

I'm sorry about the difficulties your having with your steering assembly for your Craftsman Lawn tractor. I did some research for you at Searspartsdirect.com and found some great mechanical drawings that I hope will assist you until your expert can respond to your specific question. The link is attached below.

Read More
James -
July 27, 2011
A:

This is an add-on question to the original question LOCATED HERE .

The discussion has been continued on that thread.

Read More
XX Wade_ -
Sears Technician
July 29, 2011
See more answers
Q:

Steering mechanism on Sears Companion Lawn Tractor model #917259730

A:

I can understand that this would be very important for you to know. While you are waiting for your expert answer, I have was able to be some research and found that this is a washer, however it is a specific washer. Not one that can be purchased from the store or a hardware store. It can be order on www.searspartsdirect.com, or you can go to a local repair shop and see if they have one. I hope this helps

Read More
aashe -
July 15, 2011
A:

You can very likely pick a washer up that will fit on the shaft at a local hardware store. I recommend you pick a couple up in case you need to stack them tighten everything up. If you do not have the washer in place it will allow slack in the steering and there will be problems with the steering.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
July 16, 2011
A:

Continuing with the conversation on this mower: I received a new thrust washer and I'm still waiting for the pitman shaft before I can tackle this job. The diagram for the steering assembly shows the C clip (called Ring #20 in diagram) goes on the pitman shaft ((#19 on diagram) before the thrust washer. I don't recall how it came apart but how does this thrust washer stay in place at the end of the pitman shaft - seems like it should go on before the Ring otherwise wouldn't it just slide off with nothing holding it in place?

Read More
Steven -
July 26, 2011
A:

You need to put everything in place but the C clips. Then come back and put the C clips in place. The one you're referring to here goes on the inside of the bracket on the pitman arm. There will just barely be enough room for you to push it in place with a screwdriver. It essentially will be between the bracket and the sector gear. I saw your other question and will just link that thread to this thread to prevent any confusion.

Read More
XX Wade_ -
Sears Technician
July 29, 2011
See more answers

Top Parts