Model #917258591 CRAFTSMAN Lawn, Tractor

  • Electrical
    3 Results
  • Chassis And Enclosures
    3 Results
  • Drive
    3 Results
  • Steering Assembly
    3 Results
  • Seat Assembly
    3 Results
  • Decals
    3 Results
  • Wheels And Tires
    3 Results
  • Engine
    3 Results
  • Mower Lift
    3 Results
  • Mower Deck
    3 Results
  • Hydro Transaxle
    3 Results
Find part by diagram >

Question and Answers


Re-install belts on tractor mower 917258591 917258591


Thank You for choosing Sears Glad to help out. Im looking at your model number 917258591  and I have included a link for the owners manual (page 23) that will show how to install the belts. Just click the blue link above to be taken to the page.

Park the tractor on level surface_ Engage parking brake,
° Remove mower ddve belt (See'`TO REPLACE MOWER
• Remove four screws from Loll. mandrel cover and
remove cover,
° Roll belt over the top of L.H. mandrel pulley_
° Remove belt from engine puItey_
• Remove belt from idler pulleys_
° Remove any dirt or grass clippings which may have
accumulated around mandrels and entire upper deck
° Check primary idler arm and two idlers to see that they
rotate freely.
° Install belt in both idlers. Make sure belt is in both belt
keepers at the idlers as shown°
• Install new belt onto engine puIley.
° Ro!l belt into upper groove of L.H. mandrel pulley**
o Carefully check beit routing making sure belt is in the
grooves correctly and inside belt keepers.
• Reassemble LH. mandrel cover,,
FIG. 25
DRIVE BELT" in this section of this manual).
Remove mower (See "TO REMOVE MOWER" in this
section of this manual)_
Remove four screws from R.Ho mandrel cover and
remove cover°
. Disconnect secondary clutch rod from pivot rod by
removing retainer spnng
o Carefully roll belt off R,,H.mandrel pulley.
. Remove belt from center mandrel pulley, idler pulley,
and L.H. mandrel pulley°
° Remove any dirt or grass which may have accumulated around mandrels and entire upper deck surface.
- Check secondary idler arm and idler to see that they
rotate freely.
• Be sure spring is hooked insecondary idler arm and
sway-bar bracket.
o Install new belt inlower groove of L,,H.mandrel pulley,
idler pulley, and center mandrel pulley as shown.
• Roll belt over R_H.mandrel pulley. Make sure belt isin
all grooves properly.
° Reconnect secondary clutch rod to pivot rod with
retainer spring°
• Reinstall RoHomandrel cover.
o Reinstall mower to tractor (See "INSTALL MOWER
AND DRIVE BELT" in the Assembly section of this
Reassemble mower drive belt (See "TO REPLACE
MOWER DRIVE BELT inthis section of this manual)°

If you have further questions please resubmit your question for further information.
Thank you for choosing Sears 

Read More
Sherman_G_Wallace -
Sears Technician
May 15, 2014

what model snowblower 917258591 Craftsman Tractor


Thanks for the inquiry and for using

Based upon the tractor model of 917258591, the snow thrower attachment used is model 24837 or 486.24837. There is also a snow plow attachment made for this tractor, and that model is 24441 or 486.24441.

For convenience, I have included two blue links below for either attachment. Just click on the link and it will direct you to to view and purchase if needed.

Snow Thrower Attachment 24837 for Model 917.258591

Snow Plow Attachment 24441 for Model 917.258591

Let us know if we can be of any further assistance and thanks for using  

Read More
Jeff Wallace Sr -
Sears Technician
November 25, 2013

Bag Catcher 917258591 Craftsman Tractor


Thank You for contacting

I can understand how helpful a bagger will be with your tractor. I was able to locate a bagger to fit your model. I have included a link below to our PartsDirect webpage where you can order the bagger. Just click on the blue link below.

2-Bin Soft Bagger

If you have further questions please let me know.
Thanks for using
Read More
Desirea -
Sears Technician
September 09, 2013

Top Parts