Model #917255910 CRAFTSMAN Lawn, Tractor

  • Electrical
    3 Results
  • Chassis And Enclosures
    3 Results
  • Ground Drive
    3 Results
  • Steering
    3 Results
  • Mower Lift
    3 Results
  • Mower
    3 Results
Find part by diagram >

Question and Answers

Q:

will not run 917255910 Craftsman Sears 18 h.p. garden tractor

A:

Thanks for the inquiry and for being a valued member.

I would recommend checking the routing of the belt according to the diagram on page 23 of the owner's manual. Make sure the belt keepers are within about 1/8" of the belt. I would also check to make sure there is tension being applied to the belt when the clutch is released. It could be the belt has stretched and may be in need of replacement if the above suggestions do not help. 

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
August 12, 2015
A:

Thanks for the inquiry and for being a valued member.

I would recommend checking the routing of the belt according to the diagram on page 23 of the owner's manual. Make sure the belt keepers are within about 1/8" of the belt. I would also check to make sure there is tension being applied to the belt when the clutch is released. It could be the belt has stretched and may be in need of replacement if the above suggestions do not help. 

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business.

Read More
Jeff Wallace Sr -
Sears Technician
August 12, 2015
See more answers
Q:

Tractor Belt 917255910

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Craftsman tractor.

From the information you have provided above, I can understand the frustration of having your tractor malfunction, after researching model number 917.255910. I suspect there is a belt keeper that is not adjusted correctly. I recommend inspecting the belt first. If has any burnt spots or cracked it should be replaced. If the belt is ok, go ahead and reinstall it. Once it is installed, check the belt keepers on all the pulleys. The keepers should be about a 1/8 inch away from the pulley. If you find any that are further away than that they should be adjusted. Just bend the keeper closer to the pulley. Then check the operation of the mower deck. If the belt still comes off, I recommend checking the level of the mower deck. If the rake of mower deck is tipped too far in the front, the belt could come off easier.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

*Safety disclaimer before you try and repair the unit make sure the power supply is disconnected. There may be sharp parts to the unit that can cause injury to you if not careful. If you don’t not feel comfortable checking this yourself you can request a technician by visiting www.SearsHomeService.com*

Read More
Benny23 -
Sears Technician
May 20, 2015
Q:

What engine model number is on my craftsman mower 917255910 Craftsman Sears 18 h.p. garden tractor

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Craftsman tractor.

From the information you have provided above, after researching model number   917.255910. the model number for your engine is  422437.0721-01

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
May 11, 2015

Top Parts