Model #917252700 CRAFTSMAN Lawn, Tractor

  • Electrical
    3 Results
  • Chassis And Enclosures
    3 Results
  • Drive
    3 Results
  • Steering Assembly
    3 Results
  • Engine
    3 Results
  • Seat Assembly
    3 Results
  • Decals
    3 Results
  • Wheels And Tires
    3 Results
  • Mower Lift
    3 Results
  • Mower Deck
    3 Results
Find part by diagram >

Question and Answers

Q:

Attachment compatibility 917252700 Craftsman Lawn, tractor

A:

Thanks for the inquiry and for being a valued member.

The snowthrower attachment I see that is made for this tractor model is 486.24837, or part number 24837. Using any attachment outside of the model specific attachment is not guaranteed to fit. However, after reviewing the mounts for each attachment, they are similar with subtle differences. I think this attachment could work, but there may be slight modifications needed. 

You could also contact Agri-Fab directly, and they can give you more precise fit-up compatibility based on the mounts. They are the manufacturer for these attachments and are able to help in this type of scenario.

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
October 14, 2014
Q:

Will Craftsman 486.248391snow blower attachment fit my 917.252700 riding mower?

A:

Thank you for your question.

I will be happy to assist you. I looked at our 2002 fit up chart and the snow blower is listed for your tractor. The problem is it required a fit up kit number 24800 that we no longer offer. I recommend calling 1-866-576-8388. The phone number is for the manufacturer of the snow blower. They might still have the kit or have a replacement kit.

 

I hope this is helpful. Please let me know if you need further assistance.

 

Thank you Mark

Read More
Mark T -
Sears Technician
November 02, 2013
Q:

tractor model # 917252700. cannot shift into gear while tractor is running.

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Alina -
June 29, 2013
A:

Thank you for submitting your question. I understand your concern and I will be happy to assist you. The clutch may not be fully engaging the belt. When you push the clutch pedal the belt is not fully going slack as it should. Which means the belt may still be moving slightly. If the belt is moving, the gears in the transmission are moving. If they aren't moving, then you would have to force it to go in or out of a gear. Be sure the engine is not running and lower the deck to the lowest position. With the clutch out, check the belt to be sure it is tight on the pulleys. Have someone press the clutch pedal down and let it up and see if the idler pulley moves away and against the belt to tighten it. If the belt is tight and the pulley on the transaxle is turning, check the shift arm on the transaxle to be sure it is moving the shaft in the transaxle when the gearshift is moved. If all this is working, the problem is in the transaxle. I hope this helps. Please reply back to this thread if you require further assistance. Thank you for using Manage My Life.

Read More
Tykara -
Sears Technician
July 01, 2013
See more answers

Top Parts