Model #917252590 CRAFTSMAN Lawn, Tractor

  • Electrical
    3 Results
  • Chassis And Enclosures
    3 Results
  • Drive
    3 Results
  • Steering Assembly
    3 Results
  • Engine
    3 Results
  • Seat Assembly
    3 Results
  • Decals
    3 Results
  • Wheels And Tires
    3 Results
  • Mower Lift
    3 Results
  • Mower Deck
    3 Results
  • Hydro Gear Transaxle
    3 Results
Find part by diagram >

Question and Answers

Q:

Steering assembly 917252590 Craftsman Lawn, tractor

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your lawn tractor and I do understand your frustration. Glad to help out. I'm looking at your model number 917252590 and it is possible that the steering support shaft can be retighten, if not it may need to be replaced. Here is a link for a video that will help with troubleshooting and repair. Just click the blue link above to be taken to the page. I trust this information will help you. 

 

Thank you for choosing Sears PartsDirect.com. 

Read More
Sherman_G_Wallace -
Sears Technician
October 24, 2014
Q:

riding mower problems

A:

I know how important it is to have a good working Tractor in your home so that you can keep your grass maintained. While you are waiting for an expert answer, I did manage to find a few links that will provide you with some good information about what may be causing your problem. Hope this helps!

Read More
Priscilla V -
February 01, 2012
A:

Take the dipstick out and smell the oil. If it smells like gas then the float is almost certainly going to be sticking and causing the engine to literally flood out with gas.

If the oil smells fine than it's most likely that the carburetor just needs to be cleaned up or replaced. On many models I would say just cut to the chase and replace the carburetor. This particular carb (pt 12-853-93-S) is about $135, so it's worth trying to clean it first.

You will need a can of spray carb/choke cleaner available at any auto parts store. Then you can go HERE and watch the video on cleaning the carburetor. The engine in the video is not the same brand and is smaller than yours, but the procedure is basically the same thing.

If cleaning the carburetor does not do the trick then I would recommend to replace it.

If you go the replacement route, you can go HERE to order the carburetor.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
February 02, 2012
See more answers
Q:

Hello, I have a seras riding lawnmower # 917.252590. I have followed the manual but the manual diagram but it is not the same as mower. Terry

A:

It is frustrating not being able to complete a repair. While your waiting for an expert to respond I attached a link that might help. I hope this link is useful!

Read More
Jackie S -
September 04, 2011
A:

I have attached the only drawing I have for your mower deck. When you put the belt on it, it should be slack until you move the handle to engage the blades. Once you engage the handle then the belt should tighten up. If it does not it is very likely that something else is going on preventing the belt from getting tight.

The belt will sit down into the engine pulley. Then at the 2 idler pulleys the back of the belt will ride on them. At the mandrel pulleys (the back ones) the belt will sit down in the "V" of the pulley as it does on the engine pulley.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
September 06, 2011
A:

My drawing didnt attach the first time.

Read More
XX Wade_ -
Sears Technician
September 06, 2011
See more answers

Top Parts