Model #917250910 CRAFTSMAN Lawn, Tractor

  • Electrical
    3 Results
  • Chassis And Enclosures
    3 Results
  • Drive
    3 Results
  • Steering Assembly
    3 Results
  • Lift Adjustment
    3 Results
  • Mower
    3 Results
  • Transaxle
    3 Results
Find part by diagram >

Question and Answers

Q:

model type 917250910 Craftsman Lawn tractor

A:

Thanks for the inquiry and for being a valued member.

Based upon our records for Craftsman 917.250910, we show this as Series GT6000. The GT stands for Garden Tractor, which is verified because the rear wheels are 23". 

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
October 13, 2014
Q:

replacement steering sector assembly for 120424x 917250910 Craftsman Lawn tractor

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your mower and I do understand your frustration. Glad to help out. I'm looking at your model number 917250910 and the manufacturer indicates that they no longer have it available, however there are aftermarket companies that will have the part. Here is a link that will help.  Just click the blue link above to be taken to the page. If you have further questions please resubmit your question for further information. I hope this information helps you.
 
Thank you for choosing Sears PartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
September 22, 2014
Q:

belt adjustment 917250910 Craftsman Lawn tractor

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Barbara -
May 05, 2013
A:

good I need to mow asap and need to tighten the belt to keep it from falling off.

Read More
SHANNON -
May 05, 2013
A:

Shannon, there is no adjustment for the belt. the model # you gave has a deck with 2 belts and an electric clutch. the primary belt running from the engine to the deck is kept tight by a idler pulley and a spring putting tension on the idler arm bracket. the reason for the belt not being kept tight would be the spring broke on the idler arm or the idler arm is rusty and not moving enough for the belt to stay tight or the belt is old and has stretched to far for the idler arm bracket to keep it tight. first make sure the idler arm is free and moving the full travel ( you may need to loosen the bolt and spray the pivot point with wd40 and work the arm back and forth ). make sure the spring has good tension also make sure the belt is routed properly and the mandrel pullies are not loose or a bearing going out. if all is okay the belt needs replaced most likely. if you have put on a new belt and still have an issue after checking these things post back for further help.

Read More
TC -
May 07, 2013
A:

I see that TC posted some good advice regarding the belts. I did not find a manual for that tractor online. Here is a manual for a similar model: Craftsman Tractor Model 917.25098 Owner's Manual.

 

You can use that manual for general information about your tractor.

 

If you need more help, let us know. 

Read More
Lyle W -
Sears Technician
May 08, 2013
See more answers

Top Parts