Model #917250550 CRAFTSMAN Lawn, Tractor

  • Electrical
    3 Results
  • Chassis And Enclosures
    3 Results
  • Ground Drive
    3 Results
  • Steering Assembly
    3 Results
  • Engine
    3 Results
  • Seat Assembly
    3 Results
  • Lift Assembly
    3 Results
  • Mower Deck
    3 Results
  • Decals
    3 Results
  • Wheels And Tires
    3 Results
  • Transaxle
    3 Results
Find part by diagram >

Question and Answers

Q:

fuel pump 917250550 Craftsman Lawn, tractor

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Craftsman tractor.

From the information you have provided above, after researching model number 917.250550. the part# for the fuel pump is 24-393-16-S. the price is $75.38.I have linked the pump to or website at SearsParetsDirect.com below.

Click here.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
May 01, 2015
Q:

wiring diagram for a lawn tractor 917.250550

A:

Managemylife.com is a great place to find the answers to just about anything, especially on tractors.  While you are waiting for an expert to respond, I have added a helpful link that may provide information to assist you with your question.  Have a nice day!

Read More
Yadira B -
April 24, 2013
A:

Thank you for your question.I will be happy to assist you. I posted an image below that contains the wiring diagram. Click on the image to enlarge.   I hope this is helpful. Please let me know if you need further assistance.   Thank you for using Manage my life. Mark T.

Read More
Mark T -
Sears Technician
April 24, 2013
A:

Thanks Mark, but your diagram is much differnt. It is for a 917.250551, not the 917.250550. The diagram you posted has 1 magneto I have 2, diagram has PTO, I don't

Read More
davdanger -
April 24, 2013
A:

davdanger, Thank you for your reply. I am wondering if we have a mix up with the model numbers. According to our parts list the 917.250550 has a PTO switch. The image below will show you what I am seeing. If you could please double check the model number under the seat of the tractor to be sure it is right. Please let me know what you find. Thank you for using Manage my life. Mark.

Read More
Mark T -
Sears Technician
April 25, 2013
A:

The PTO swich is for the electric clutch that drives the mower, not a pto like a larger tractor. Model # 917.250550, Serial #112994C 001225, Kohler engine # CV22S

Read More
davdanger -
April 25, 2013
A:

davdanger, You are correct the PTO switch is to engage the mower deck. The wiring diagram above shows a tractor with a PTO switch. The diagram onlt shows the wiring to the engine. The reason is the tractor can have one of many different engines. Please let me know where you are having a problem. I will be happy to help.

Read More
Mark T -
Sears Technician
April 25, 2013
A:

From what I've learned they Sears changes model numbers when they change engines. The problem I'm having is running rough, backfires and when any load is put on the engine it dies. Suspecting the magnetos, I pulled the top of and find 3 wires to each magneto, Tan, Yellow, spark plug. Where do the tan and yellow go? If I disconect either small wire from one magneto the dies, other runs as before. before I replace a magneto I want to know what the wires do and where they go

Read More
davdanger -
April 25, 2013
A:

Thank you for posting more information. This engine has a spark advance module. The wires you are removing are from the module and tell the engine when to fire. If the engine is running rough I recommend starting the tractor. Then run the engine at full speed and slowly pull out on the choke. If the engine runs better when you pull the choke out slightly I suspect the problem is a partly plugged jet in the carburetor. To cure this, the carburetor needs to be cleaned or replaced. To clean the carburetor you need to disassemble the carburetor and spray the passages out with carburetor cleaner. Once it is clean reassemble the carburetor, check the operation. Be sure, when you remove the carburetor to take a picture of how the linkage is connected. It might come in handy when you put it back together. If you rather replace the carburetor you can order on from the following link. Kohler model CV22S engine parts I hope this is helpful. Please let me know if you need further assistance. Thank you for using Manage my life. Mark.

Read More
Mark T -
Sears Technician
April 28, 2013
A:

NOT THE CARB!!!!!!! what is the wiring diagram? move left mag to right side, right mag to left side problem follows mag (now on right) Now that you have mentioned the advance unit partialy explains why there are 2 small wires to the mags. Since problem moves with mags, advance unit or carb unlikely. If I had the wiring for this unit I could have deciferd this some time ago. The original diagram posted was the WRONG ignition unit.

Read More
davdanger -
April 28, 2013
A:

davdanger, I posted the wiring diagram for the engine below. This diagram shows all options available for the engine. Your engine will not have all the items listed on the diagram. The ignition will be the same as yours.

Read More
Mark T -
Sears Technician
April 28, 2013
See more answers
Q:

Hitch

A:

I understand your looking to find out if your Craftsman Riding Tractor can operate with a dozer blade. If you can please provide your model number and some specific details, in order to get a detailed answer from the expert. You can add this information down on the thread below. I hope this helps!!!!!

Read More
Raquel F -
October 02, 2010
A:

Tractor Model 917250550 Serial number112994C001396 Do you need it for the electric Hitch and the Dozer blade also?

Read More
ontherimpsllc -
October 03, 2010
A:

In general, if the electric lift controls the deck lift it will also control the blade. That is, as long as the blade attached to the deck lift and doesn’t have its own lift system.

I would need the model number of the blade and tractor to know for sure though. You can reply back here on this thread with those numbers and I can pull the information to find out.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
October 04, 2010
A:

Dozer blade 486.244120122 Elec actuator Kit 917.242440 Will this actuator work a Dozer blade?

Read More
ontherimpsllc -
October 06, 2010
A:

Yes, the electric lift should work with your dozer blade. My own personal preference has always been to remove the cutting deck when I know I will be doing big jobs with the dozer blade. If nothing else, it just seems to make it easier to move around the yard without having to worry about getting the deck hung up on things. Your blade and lift motor are pretty much the same as what I have on one of my tractors.

Read More
XX Wade_ -
Sears Technician
October 07, 2010
See more answers

Top Parts