Model #91725040 CRAFTSMAN Lawn, Tractor

  • Engine
    3 Results
  • Drive Assembly
    3 Results
  • Electrical System
    3 Results
Find part by diagram >

Question and Answers

Q:

Issues with tractor shift lever.

A:

Having issues with your Tractor can be quite disappointing. While you are waiting on an expert to answer your question, I found your diagram on Sears Parts Direct website and it shows you step by step on what to do. I attached the link below. Hope this helps!

Read More
Dezeray S -
December 14, 2010
A:

There are no photos or drawings of what it should look like down in the shifter hole, this is an old tractor. When you look down in the shifter hole if you see 2 forks, up/down or side/side from each other, all you need to do is use a screw driver or something to line them up. Once they're lined up you place the shifter in and it should kind of pop into place. Then you can tighten it down enough to where you can move the shifter without the whole assembly moving around and test it out by going in and out of gear.

If the inside of the shifter are does not look like forks, I will need a description of it so I can try to figure out how it has to lined up. I'm pretty sure that it will be 2 forks down in there as I cannot think of a time where I've seen one that wasn�t that way, and that goes back to tractors from the early 1970's.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
December 15, 2010
A:

Wade B EXPERT soultion solved the shifter problem. Thanks Wade B

Read More
Richard -
December 16, 2010
A:

@Richard, we're very happy to help. I'm just glad we were able to help you get back up and running. It's not often we see these older machines anymore. I really enjoy it when people are still using them (and swear by them). If we can help out with anything else, just let us know. Have a great holiday!

Read More
XX Wade_ -
Sears Technician
December 17, 2010
See more answers