Model #917250262 CRAFTSMAN Lawn, Tractor

  • Electrical
    3 Results
  • Chassis And Enclosures
    3 Results
  • Ground Drive
    3 Results
  • Steering Assembly
    3 Results
  • Engine
    3 Results
  • Lift Assembly
    3 Results
  • Seat Assembly
    3 Results
  • Decals
    3 Results
  • Wheels And Tires
    3 Results
  • Mower Deck
    3 Results
  • Transaxle
    3 Results
  • Air Intake Div71/501
    3 Results
  • Baffles And Shroud Div71/501
    3 Results
  • Breather And Vent Div71/501
    3 Results
  • Crankcase Div71/501
    3 Results
  • Carburetor Div71/501
    3 Results
  • Cylinder Head Div71/501
    3 Results
  • Electric Starter Div71/501
    3 Results
  • Dipstick Div71/501
    3 Results
  • Crankshaft Div71/501
    3 Results
  • Exhaust Div71/501
    3 Results
  • Governor Div71/501
    3 Results
  • Flywheel Div71/501
    3 Results
  • Fuel Pump Div71/501
    3 Results
  • Ignition Div71/501
    3 Results
  • Oil Pump Div71/501
    3 Results
  • Oil Pan Div71/501
    3 Results
  • Oil Switch Div71/501
    3 Results
  • Oil Filter Div71/501
    3 Results
  • Camshaft And Valves Div71/501
    3 Results
  • Piston And Rod Div71/501
    3 Results
Find part by diagram >

Question and Answers

Q:

the clutch/brake illustration in the owners manual of my craftsman tractor is not the same as what is actually on my tractor

A:

It can get really frustrating when the information you are depending on is not accurate. I did some research and found an expert answer that I hope will assist you until your expert can respond. I attached two links below. The other link is searspartsdirect where I hope you can pull up a good mechanical drawing of your tractor. Put in your model # and then hit search.

Read More
James -
December 08, 2010
A:

The answer sent by James R has good information.

I am sending you an image showing the brake adjustment for tractors with the braking system your tractor has. To look at the parts involved in the braking system of the tractor look in the owners manual or go to [www.partsdirect.com?sid=MMLxexpertxmerch]. Select the "ground drive" page. Item 18 is the lever that engages the brake pucks (item 25) against the brake disc (item 10).

Read More
Jimmy K -
Sears Technician
December 09, 2010
See more answers
Q:

The dozer blade on my craftsman tractor will not rotate to the left or the right when the control handle is squeezed.

A:

A tractor is definitely one of the most yard equipment we use a lot. Sorry to hear that your having problems with it. I have came upon some information on Manage my life that can be very helpful to you. I attached the links below, hope they help!

Read More
Maira -
December 07, 2010
A:

Are you able to move the lock manually? If so, there is some sort of problem with the cable. Have you adjusted the cable to make sure there is tension between the holder and the cable end at the blade lock?

If the lock moves but the blade doesn�t turn, that will just be a matter of getting the pivot freed up. You might have to loosen the bolt that it pivots on and oil it up real good.

You can let me know what it looks like back here on this thread and we can discuss further if needed.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
December 08, 2010
See more answers
Q:

Where can I find a schematic showing the position for the gear shift lever for my Craftsman tractor model 917.250262?

A:

I could not find a detailed picture showing the gear number. Your tractor has a high and low range shifter located on the right hand side. The gear shifter has 3 forward and 1 reverse. Reverse is either top left or bottom right position of the shifter. I have provided you an image of what I was able to find on the tractor. Here is a link for your tractor manual. Manual

Read More
Mark T Personal Solutions Manager -
Sears Technician
December 14, 2009

Top Parts