Model #917250020 CRAFTSMAN Lawn, Tractor

  • Electrical
    3 Results
  • Chassis And Enclosures
    3 Results
  • Drive
    3 Results
  • Steering Assembly
    3 Results
  • Lift Adjustment
    3 Results
  • 38" Mower
    3 Results
Find part by diagram >

Question and Answers

Q:

Is this still available? 486244021 Craftsman Dozer blade

A:

Model #486244021 Craftsman Dozer blade @http://www.searspartsdirect.com/partsdirect/part-model/Craftsman-Parts/Snow-removal-equipment-Parts/Model-486244021/0247/1500640/00060957/00001?blt=06&prst=0&shdMod=486244021

Read More
Anonymous -
August 05, 2013
A:

MODEL NO. 917.254450 AND 917.250020 WITHOUT MOWER DECK - Craftsman Garden Tractor Snow and Dozer Blade 16 in. High @http://www.sears.com/shc/s/p_10153_12605_07124414000P#desc

Read More
Anonymous -
August 05, 2013
A:

Thank you for choosing managemylife.com.

There are parts still available for model 486244021, however, the blade assembly and a washer are no longer available for this model. My records show this snow blade was made in 1987, normally parts are discountinued after about 10-12 years. I would recommend replacing the whole snow blade attachment.

I hope this information helps you.

Read More
JessicaM -
Sears Technician
August 06, 2013
See more answers
Q:

dies when I turn on mower, 917250020 Craftsman 18 hp garden tractor

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Barbara -
June 08, 2013
A:

This is likely a problem with the seat switch on the tractor. If you cannot drive the tractor then I would say it is a problem with the seat switch. It would actually very likely be the plug for the seat switch causing this.

If you can drive the machine and it only dies when you engage the blades, check to make sure you can spin the blades by hand. Obviously, check this with the engine off. If you cannot spin the blades by hand then there is something block them or a seized pulley/bearing.

Let me know what you find.

Read More
Wade_B -
Sears Technician
June 10, 2013
A:

There is a relay in wiring that was the problem. It i not listed in parts page. it is wired into seat switch and also mower switch, is located on right side under cowl near to rear of compartment

Read More
Jay -
June 13, 2013
See more answers

Top Parts