Model #917242484 CRAFTSMAN Accessories / Attachments, Gas Tiller

Find part by diagram >

Question and Answers

Q:

tines for model # 917242484 917242484

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your tiller. Upon researching model 917242484; the tines for this model have been discontinued and are no longer available, we do not have a substitution.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
April 21, 2015
Q:

tines

A:

I know how important it is to have the correct parts for your tiller and I will be happy to help. I did some research and I was able to find a link in where you can enter the model number and a parts list diagram will pop up. Click here for the link. I hope this helps with your research while you wait for your expert response.

Read More
Joseph P. -
June 19, 2013
A:

Thank you for your question.   I am sorry you are having a problem with the tow behind tiller model number 917242484.   I searched our site and others on line for the tines. It looks as if these tines have not been in production for quite some time. I am sorry I could not find a source for these tines. You may be able to have a local welder fabricate and weld on new tines to the old hubs. I hope this is helpful. Please let me know if you need further assistance on the tractor.      Thank you for using Manage my life. Mark T.

Read More
Mark T -
Sears Technician
June 21, 2013
See more answers
Q:

sleeve hitch

A:

I know this type of information can be very helpful for you to have.�While you are waiting for your expert answer, I did some research on the unit.�I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information.�Thank you for using Manage My Life.

Read More
Joseph P. -
November 10, 2011
A:

i will try to send picts to see if it will help.

Read More
lance -
November 10, 2011
A:

This may seem like a bit of an odd request, but take the drawbar that you have mounted on the tiller in your photos and connect that to the tractor. Then connect the tiller to the draw bar. In the manual for the sleeve hitch assembly they show the "lift assembly" on page 8, that part should stay connected to the tractor/sleeve hitch.

Let me know what this does to change anything. I have a similar set up on one of my tractors (older stuff though) and I just have to tilt the tiller slightly forward to connect it.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
November 12, 2011
A:

hi wade. tried your suggestion to no avail.ive allready had it hooked up but as u may be able to see in picts it is way to low and no way to lift it off the ground to even move it.and the tiller is far from being level. and the tiller wheels are 4 inches off the ground.this is all stock. i dont understand. if u look at my earlier picts i scribed where i think i will drill new holes 8 inches above stock holes.something very wrong

Read More
lance -
November 13, 2011
A:

Well, I really don't see what the problem can be with this. I can't direct you to modify (drill holes) or anything like that. But what you're describing makes sense. You can contact Sears to have a technician come out on this and quite honestly, I do think that may be best. I have a feeling there is some little something that we're missing. I can't imaging what it would be as it looks like you've done the install just as described in the manual. But I've not run across this before and we have a lot of these out there so I can't think it's anything "common".

Read More
XX Wade_ -
Sears Technician
November 15, 2011
A:

Hey wade.could I bother u for the maker of the tiller 917.242484 and a phone number so I could talk to them about this problem. It was not made by agrifab. As it is impossible to get an answer on the phone. Thanx.

Read More
lance -
November 16, 2011
A:

The manufacturer parent company is Husqvarna for the tiller and tractor. You can reach them at 1-800-487-5951. When this tiller was made, it was manufactured by American Yard Products, which is owned by Husqvarna. Now, it's all wrapped up into the Husqvarna name.

Read More
XX Wade_ -
Sears Technician
November 16, 2011
See more answers

Top Parts