Model #9119599980 KENMORE Free Standing, Electric

  • Backguard Section
    3 Results
  • Main Top Section
    3 Results
  • Body Section
    3 Results
  • Door Lock Section
    3 Results
  • Oven Door Section
    3 Results
  • Wire Harnesses And Components
    3 Results
Find part by diagram >

Question and Answers


stovetop works,display panel doesn't,NO oven,timer,bake,broil,oven light 9119599980


Thank you for your inquiry on your Kenmore Range, Model: 911.9599980. From reviewing the details on your model, I able to find video on how to trouble shoot the parts you listed I have provided the links the videos below. From what your describing is sounding like you might have control board/timer issue. I suggest you have a technician diagnose the issue.

Click Here For Broil And Bake Element 

Safety Warning: Before beginning the repair, disconnect the direct power supply to the range to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663

I hope this answered your question. Thank you for contacting, and have yourself a wonderful day. 

Read More
Gerry93 -
Sears Technician
February 27, 2015

Oven will not heat 9119599980 Kenmore Electric range


Hello glad to help.  Thank You for choosing Sears
I am sorry and do understand your frustration when there is trouble with the oven not heating.
Glad to help out.   Im  looking at your Kenmore model number 911.9599980.

Lets make sure you got the correct bake element which I have listed below.   Also how to run a meter to the element and verify if it is good.   Also please check to make sure it is wired on good.   If after testing the element and find it is good.   The next item to look at is the wiring then if wiring is good the main control clock is bad.   Even though all else is working well the part of the control clock that runs the bake element is bad and needs to be replaced.

How to test your electric elements for the oven:
1.  Unplug your oven from the wall outlet.  Turn off the oven's breaker in the service panel if needed.
2.  Open the oven door and remove the baking racks.  Unscrew the heating elements from the oven.
3.  Get a multi-meter and set it to Rx1K.  Just place one lead of the multimeter on one end of the
    element and then place the other lead on the other end of the element.  The needle on your 
    multi-meter should register anywhere from 19 to 115 ohms.   Replace it if not in that area.

Bake element for model 911.9599980

If you have further questions please let me know.
Thanks for choosing Sears

Read More
Larry L -
Sears Technician
February 10, 2014

Where can I get a Lady Kenmore Electric Oven manual for Model 911.9599980? I'm getting an -F2- Error and it's beeping every 30 - 60 minutes

A: is a great place to find your owner's manual for various products. I am sorry that you are having some difficulties finding yours. Manufacturers stop producing manuals after ten years. This could be the cause of availability. Sometimes the expert can find one that is very similar to yours. You should hear back within two business days. If you are having a specific problem please submit your question on the existing thread by click on the reply box below for your expert.

Read More
Julio -
July 15, 2013

Thank you for choosing I understand how important it is to have a manual for your oven. We try to keep our library up to date as much as possible. However, being that this is an older model, we no longer have an owners manual available. I apologize for this inconvenience. The manufacturer will usually stop making parts for any given unit, 7-10 years after production.
The F2 error code on your oven indicates that temperatures has exceeded the normal conditions. You may have a malfunctioning oven temperature sensor or electronic board. If you have an ohm meter and are comfortable testing voltage, you can test your temperature sensor. It should have a resistance measurement of approximately 1100 ohms at room temperature. If the sensor checks out okay, you will need to replace the control board.
SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services
If you have further questions please let me know. Thanks for using

Read More
Desirea -
Sears Technician
July 17, 2013
See more answers

Top Parts