Model #91195976790 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Maintop
    3 Results
  • Body
    3 Results
  • Door
    3 Results
  • Door Lock
    3 Results
  • Fan
    3 Results
  • Wire Harnesses And Components
    3 Results
Find part by diagram >

Question and Answers

Q:

Kenmoore Model # 91195976790 Replacing Oven control switch But the wiring on the new one is different.

A:

Good morning. I was unable to find a wiring diagram with your specific model number. Our expert team will review your request and investigate. They will give you a detailed response within a day or two. I did find a link that had a similar concern that I've provided below. I hope this link is close to your situation and would offer some quick information that you can use. Have a nice Wednesday morning.

Read More
Henry -
September 05, 2012
A:

You should have received an instruction sheet with the new control board that shows how to connect the wires on that substituted component. I posted the pages that I have on file for that control board in the images below (1st 5 pages). The sixth image below shows the wiring diagram for your range and a drawing of the original control board. You may be able to use this information to connect the new control board. Be sure that you unplug the range before accessing internal components.

Those instruction pages cover several different models of ranges so you will not need all of the information in those documents. You may be able to determine which information that you need based on your personal observation of the original control board and that replacement control board. I you need more specific help with wire placement, reply with additional details and digital pictures (if possible).

This can be a confusing repair. If you get to the point where you need to have a service technician install that control board, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
September 06, 2012
A:

Here are the additional images.

Read More
Lyle W -
Sears Technician
September 06, 2012
A:

Thanks for your help Lyle W. That's just what I needed every thing works just fine I appreciate all your help. Have a great Day.

Read More
Pat -
September 06, 2012
A:

Thanks Pat. We are glad to hear that you completed the repair. Let us know if you ever need more help.

Read More
Lyle W -
Sears Technician
September 07, 2012
See more answers
Q:

Why is my convection fan not working in my electric range?

A:

There could be one of several possible failures preventing the convection fan from operating:

  • Clock/oven control
  • Door switch
  • Convection fan motor
  • Loose or bad wiring connection

The clock/oven control has a relay made onto the control board that must close the L1 relay in order to supply the voltage to the convection fan motor. The door switch must also close in order to supply the neutral line to the convection fan motor. The fan motor needs L1 and neutral supplied to it or it will not run.

All 3 parts will need to be tested with a volt/ohm and the convection fan wiring circuit should be checked for any loose or bad connections. I added an image showing the convection fan circuit to aide the service technician in diagnosing the failure.

I recommend calling a service technician to diagnose and repair your range.

Read More
Joey S -
Sears Technician
August 29, 2008

Top Parts