Model #91195955590 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Door Lock
    3 Results
  • Main Top
    3 Results
  • Body
    3 Results
  • Wire Harness And Components
    3 Results
  • Oven Door
    3 Results
  • Fan
    3 Results
Find part by diagram >

Question and Answers

Q:

I have a Kenmore Range Model #95955 purchased in 1996, that is flashing error message F9 and beeping

A:

It is always a little frustrating when an appliance starts acting up on us. I think we just see money going out the window. This web site is here to help us save money. I'm sorry to hear that you are having some issues with your Kenmore range. I did some research at Managemylife website and found an expert answer to a similar question that may help until your expert can respond. I have attached the link below so you can check it out. If you do decide to schedule service and have a qualified technician assist you, I have attached a link to SearsHomeServices.com. I hope the links below will help you.

Read More
James -
March 10, 2012
A:

That type of code normally indicates that you have a problem with the switches on the oven door lock mechanism. You can unplug the range and check the wiring on that oven door lock mechanism. The image below shows how to lift that cook top to access the door lock assembly. You don't have to pull that top all of the way off. After you lift it and securely prop it up, you can check the wiring on those door lock switches. You may find a loose wire that is causing this problem. After checking those wires, reassemble and test the range to see if it will work. If you still see the F9 code, then you may need to replace the micro-switches on that door lock assembly. You can order parts from the Sears PartsDirect website. The full model number of your range appears to be 911.95955590. Check the model number plate that is physically attached to your range. Use that full model number to access that parts list diagram for your range.

Replacing the switches on that door lock assembly may fix your problem. Be sure that you unplug the range before accessing and replacing internal components.

If you need more help, reply with additional details.

If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
March 12, 2012
See more answers
Q:

Stove control display reads "door locked"

A:

Make sure that the door lock lever is in the "open" position.

You could have a mechanical failure in the door lock assembly or a bad micro-switch on that mechanism. A problem with the electronic control board can also cause this failure.

I recommend that you have a service technician diagnose and repair this type of failure on the range. Here is a link for the Sears Service website: Sears Home Services .

If you need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
December 26, 2010

Top Parts