Model #91195589990 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Maintop
    3 Results
  • Wire Harnesses/wiring Components
    3 Results
  • Body
    3 Results
  • Door
    3 Results
  • Door Lock
    3 Results
Find part by diagram >

Question and Answers

Q:

Changing radiant stove element

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Alina F. -
November 08, 2011
A:

Thank you for your question.

I will be happy to assist you. First, unplug or turn the breaker off to the range. Then open the oven door and remove the screws that secure the cook top to the body. Once they are removed, lift the top, and hold it up with a short broom handle. Next, take the screw out of the element and let it rest on the top of the oven cavity. Secure the new element to the cook top and move one wire at a time to the new element. After all the wires are transferred to the new element, reassemble the range in the reverse order. I have also found a video on how to replace the element. Click here to watch the video.

I hope this is helpful. Please let me know if you need further assistance.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
November 09, 2011
See more answers
Q:

I own a Kenmore oven, model #911.95589990 I observed a portion of the element, approximately a one inch length, to red hot, and this length was slowly moving .

A:

That's great that you were able to observe the heating element while in that process. While you wait for the expert to answer your question more specifically you might want to look at the links that i provided down bellow.

Read More
celene -
January 10, 2011
A:

Thank you for your question and I understand your concern. Yes, you have just witnessed the death of a heating element. The heating element will need to be removed and replaced. I also recommend disconnecting the power supply from the range until the element has been removed and replaced.

The Broil element (upper) is part #WB44T10009 and the Bake element (lower) is part #WB44T10014. The element can be ordered from Sears PartsDirect

NOTE: Disconnect the power supply from the range before removing and replacing the element.

Read More
Joey S -
Sears Technician
January 12, 2011
See more answers

Top Parts