Model #91195582991 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Maintop
    3 Results
  • Wire Harnesses/wiring Components
    3 Results
  • Body
    3 Results
  • Door
    3 Results
  • Door Lock
    3 Results
Find part by diagram >

Question and Answers

Q:

broiler element 91195582991 Kenmore Electric range

A:

Kevin,

  I have attached a video link on how this element is replaced.  Part #WB44T10009

Thanks
GClem 9680

Read More
Gary9465 -
Sears Technician
November 12, 2015
Q:

Can I still use the range if the heating element in the oven burst?

A:

Thanks for contacting manage my life about your range/oven 911.95582991 model, I will be glad to assist you. When the bake or broil element burns into the rest of the range can normally be used as long as the element is not shorted to ground and you do not turn the oven on when using. If you reset the breakers and they go off right away the element or wiring is grounded and you should not attempt to use the range/oven.

I hope this helps you.

Here is a link for parts. If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services.Ron H.

Read More
Ron H -
Sears Technician
August 15, 2013
Q:

How do you replace the bake unit 91195582991 Kenmore Electric range

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Alina -
February 09, 2013
A:

Thank You for Posting your question on ManageMyLife.com

It's great that you want to complete this repair on your own. After researching you model I was able to locate some simple instruction for your repair. I have also included a link to our Sears PartsDirect webpage where you can purchase the new element.

Bake Element for Model 911.95582991

Please remember to unplug your range before performing repair

1. Remove the Oven Racks from range.

2. Remove bolts from Bake Element Bracket.

3. Slowly lift element until you see the element terminals.

4. Unplug terminals from old element. If ternminals get stuck behind oven wall you can remove back panel of oven to push the wires back through hole.

5. Connect terminals to new bake element.

6. Align brackets and replace bolts

Read More
Desirea -
Sears Technician
February 09, 2013
See more answers

Top Parts