Model #91195402000 KENMORE Free Standing, Electric

  • Backguard
    3 Results
  • Maintop
    3 Results
  • Wire Harnesses And Components
    3 Results
  • Body
    3 Results
  • Door
    3 Results
  • Door Lock
    3 Results
Find part by diagram >

Question and Answers

Q:

Bake elenent caught fire

A:

A non working Range is not something any of us want to see. If you are technically handy, this is a good site to get instruction and fix some things yourself. If you do not feel confident doing your own repairs, an option is to visit Sears Home Services and use the scheduler. While you wait for the expert to review your model, you can check the bottom links for some possibilities. Hope this is of help.

Read More
Priscilla V -
September 27, 2011
A:

When the bake element shorts enough to cause a fire, it sometimes damages the contacts in the relay on the clock. If this happens, the clock will have to be replaced along with the bake element.

I think you would be wise to consider replacing the range. You can shop prices and features at Sears.com

Read More
Jimmy K -
Sears Technician
September 29, 2011
See more answers
Q:

kenmore oven not heating up to correct temp

A:

I know it can be very frustrating to have an appliance you depend on break down. Managemylife.com is always a great resource to find the answers to just about anything. I would suggest that you provide the model # and any other information that you think may help your expert respond with the best possible response. Continue this existing thread, just click on reply below and then add your information. This will speed up the process. I did do some research for you at Managemylife and found an expert answer to a similar question. This may shed some light on the problem until your expert can respond. The link has been attached below.

Read More
James -
September 07, 2011
A:

I see that you posted a model number of 911.95402000 on that previous answer that James R. provided in the above response. Thanks for adding that model number.

The oven temperature in this range can be adjusted up to 35 degrees using the procedure shown in the image below. If the oven temperature is consistently off by 35 degrees or less that you should be able to use that procedure to fix your problem.

If the oven never reaches the correct temperature, you could have a problem with the bake or the broil element. Check to see if the broil mode works properly. If it does, then you could have a problem with the bake element. Check the bake element for visible damage. Here is video that shows how to test an oven element: Oven Element Testing . This may help you determine whether you have a failed element in the oven. Be sure that you unplug the range before accessing internal components.

If you need parts, you can order them from the Sears PartsDirect website.

If the elements are okay, you could have a problem with the temperature sensor or the electronic clock control board. Reply with additional details if you need more help with this problem.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
September 09, 2011
See more answers
Q:

Why is the oven on my Kenmore range not heating correctly?

A:

What your describing sounds like the bake burner is not coming on at all. When you start the oven both burners will come on until the unit is preheated. If only the broil burner is coming on, this is the reason why the oven is not reaching the desired temp. When you turn the oven on open the oven door & look near the bake burner for the reddish glow of the igniter. If the bake igniter is not glowing bright orange, I suspect that the bake igniter has failed. The only way to confirm this is by checking the voltage to the bake igniter or replacing the igniter to see if that fixes it.

Read More
biker dave -
Sears Technician
April 24, 2009
A:

Kenmore range model number911.95402000. no sure of the year-thanks for help

Read More
karen -
September 07, 2011
A:

Hello Karen. Thanks for providing that model number. I provided an answer to your original question post using that model number. The link below this response will take you to that original question post.

Read More
Lyle W -
Sears Technician
September 09, 2011
See more answers

Top Parts